Jump to content


My new exhaust


  • Please log in to reply
13 replies to this topic

#1 _v8slrtorana_

_v8slrtorana_
  • Guests

Posted 27 March 2007 - 11:01 PM

I can't believe that something has gone right.
I took the SLR to Toms Mufflers on the Stuart Hwy (Darwin) today and can actually say they did what i wanted, and did a good job.
I got them to fit 2 1/2 dual system.
I got them fit 2 bolt flanges after the tranny so i can go racing without cooking the turbo 400.
They fitted my x pipe i purchased from evil bay.
They supplied and fitted 2x offset in, center out Supercat straight through mufflers with 2 bolt flanges at the back of them.
They fitted my old tail(dump) pipes.
All good welds, no leaks, no nasty bends and the pipes clear the tranny really well like i asked them to.
The sound is quiet and tuned. :clap:

#2 TerrA LX

TerrA LX

    Fulcrum Fixture

  • Members
  • PipPipPipPipPipPipPip
  • 14,241 posts
  • Location:Sid 'n' knee
  • Joined: 31-May 06

Posted 27 March 2007 - 11:04 PM

:useless:

#3 77_LX_HATCH

77_LX_HATCH

    Forum Fan

  • Members
  • PipPipPipPip
  • 329 posts
  • Location:Adelaide West
  • Joined: 15-November 05

Posted 28 March 2007 - 11:07 AM

Did they go up and over the diff?

I just had a single 2.5 fitted in mine from the extractors as the one i bought didnt fit :( Apparently he was meant to tell me he had a 9inch in his car :furious: They actually had a bit of trouble fitting it, it still hits the floorpan when i go over sometimes even small bumps.

Cheers

Mike

#4 Neils LX

Neils LX

    Forum Fixture

  • Members
  • PipPipPipPipPip
  • 2,074 posts
  • Name:a
  • Location:North west NSW
  • Joined: 18-March 07

Posted 28 March 2007 - 03:45 PM

How does the single 2.5 sound. I have decided to fit a single 2.5 to my Torana once the VS 304 is fitted. The duel 2 inch sounds nice but just a little too crakly for me.
Chears Neil

#5 77_LX_HATCH

77_LX_HATCH

    Forum Fan

  • Members
  • PipPipPipPip
  • 329 posts
  • Location:Adelaide West
  • Joined: 15-November 05

Posted 28 March 2007 - 03:47 PM

It sounds nice actually. I thought about going the twin system, but they re-used some of my original 2.5 inch piping so i got it cheaper.

Its not too loud but still has the nice v8 sound :)

Cheers

Mike

#6 _rhysandhisLJ_

_rhysandhisLJ_
  • Guests

Posted 28 March 2007 - 06:43 PM

I just had a twin 2 1/2 inch system installed on my torana which runs a VP 304 injected V8.
Sounds great, though i did have to bolt in some quieter mufflers to pass my engineers certificate.
Here's some snapshots
Posted Image
Posted Image

Cheers,
Rhys.

#7 _Herne_

_Herne_
  • Guests

Posted 28 March 2007 - 07:43 PM

Nice job Rhys, I figured the bastids would make you quieten the exhaust lol no doubt they will do the same to me when mine eventually goes in for re engineering but I have plenty to do before that happens, I may as well run with the rego I have until I have the car completed and inspected.
I love the sound of my new exhaust so no matter what I have to do when engineered I will be putting it back the way it sounds now :)

Good work mate.


Herne

#8 _v8slrtorana_

_v8slrtorana_
  • Guests

Posted 28 March 2007 - 09:10 PM

Pics will be up 2morrow.
Also putting in a TCI shift kit into the box, so will take photos 4 all to c.

lxsl76, what mufflers do you have?

I found that going from a twin 2 1/4 straight through redback system to my current system, it is actually not as noisy as it used to be. Hard to belive, but true.

#9 _rhysandhisLJ_

_rhysandhisLJ_
  • Guests

Posted 28 March 2007 - 09:20 PM

Haha no doubt they will make you change them Herne. With my other mufflers the sound test recorded 103dB at 3500rpm i think it was. Now it's at 89dB, one decibel below the limit :D That's until vicroads gets the engineers certificate ha!
v8slr i'm not too sure what mufflers i have, i'll be giving my exhaust bloke a call either tomorrow or friday, i'll ask him and get back to you!

Edited by lxsl76, 28 March 2007 - 09:21 PM.


#10 _v8slrtorana_

_v8slrtorana_
  • Guests

Posted 01 April 2007 - 10:09 PM

Posted Image
Posted Image
Would have got pics up ealier but the new born has been a little sick.

#11 _MediuM16A2_

_MediuM16A2_
  • Guests

Posted 01 April 2007 - 10:12 PM

yep ur right..looks great..

#12 _CHOPPER_

_CHOPPER_
  • Guests

Posted 01 April 2007 - 10:19 PM

Are you leaking a bit of auto trans fluid? Looks like it might be coming from where the pan used to be.

#13 knoath

knoath

    far.... FAR

  • Members
  • PipPipPipPipPip
  • 2,036 posts
  • Location:Melbourne, Northern Subs
  • Joined: 09-November 05

Posted 01 April 2007 - 10:22 PM

Look after the new born mate, pics look great. :clap:
It's nice when things work out the way they should, isn't it? :rolleyes:

#14 _v8slrtorana_

_v8slrtorana_
  • Guests

Posted 01 April 2007 - 10:50 PM

Are you leaking a bit of auto trans fluid? Looks like it might be coming from where the pan used to be.

Good one CHOPPER :tease:
Thanks to my little brother, the t400 now shifts quicker and firmer with a TCI trans scat kit.
One thing i hated about the t400 is it dont shift to 1st gear when you want it too, it only shifts down to first when your crawling. Now, you select 1st, it goes into 1st, be warned!
I got quoted $350 to install the kit by a local tranny guy. Now that must be $150 per hour and $40 for the oil. Go figure. Rip off.
I can't do autos cause im alergic to ATF.
Part number for the kit is TCI-400000 $119.95 from VPW.

My kiddo is ok now.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users