Can anyone give me any information on a LC Torana with this VIN Number? 82911CH603988
Would like to know if it is a GTR or XU-1, Build date etc
VIN identification
Started by
GTR-1
, Apr 11 2007 06:24 PM
55 replies to this topic
#1
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 11 April 2007 - 06:24 PM
#2
_Skapinad_
_Skapinad_
-
- Guests
Posted 11 April 2007 - 06:39 PM
Hi GTR-1, have got any further info ?
#3
_MRNOS_
_MRNOS_
-
- Guests
Posted 11 April 2007 - 06:40 PM
Production date is 20-10-69, dealer code 000, no sales date listed, i'd say GTR
Edited by MRNOS, 11 April 2007 - 06:44 PM.
#4
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 11 April 2007 - 06:56 PM
HiHi GTR-1, have got any further info ?
Went to see this car in the weekend.
Engine number ck43845 Does that engine belong in the car (ie factory fitted)
Body 20239B
Trim 1193
Haven't got much more than that
#5
_Skapinad_
_Skapinad_
-
- Guests
Posted 11 April 2007 - 07:14 PM
Hey mate, I know the car, I nearly bought it a couple of months ago... It is not real. the numbers dont match.. The seller is heath rickett, obviously your in nz. the car does have an xu1 block, at best its a gtr mocked up..... send me your email adress and i can forward you further info...The guy is dead set thats it an xu1, unfortunately it is not, its a bitsa, beware. this is the last email correspondance i had with the seller....fyi, he had accepted my offer of 23k NZ dollars.... about $2 sussie dollars!!!!lol
Heath,
I have received some further inofrmation today on a couple of posts I had put on forums and phone calls i had made last week. I spoke to the 2 previous owners of the vehicle. The guy you bought it off, had little idea of its history, as he bought it as it is today, and spent a few grand tidying it up. the original owner who first registered the vehicle, tells me it was made up from a bare shell, using numerous parts. So unfortunately, it is not an XU1, though it does have a fair few XU1 parts. I think to verify if the body is for sure you would need to locate the chassis number and decode it using the following article: http://home.exetel.c...the numbers.pdf
this article clearly shows that even the two tags you have are not XU1 tags, most likely it is a GTR.
Of course therefore I do not wish to purchase the vehicle, and given their value now, anyone who makes enquiries will probably come to the same conclusion I have. Nonetheless you only paid 8k for it, and thats not too bad for a mock up....If you want to sell it anyway id be prepared to pay around 10k for it.
Sorry about the stuff around but i needed to be sure. If you would like to discuss further feel free to give me a call. If you dont want to halve your price i understand..... and good luck with the sale.
GTR-1 PM me if you want further info, I purchased the VIR from your transport authority an actually spoke to the previous owner.....can forward it if you want the info..
Adam
Heath,
I have received some further inofrmation today on a couple of posts I had put on forums and phone calls i had made last week. I spoke to the 2 previous owners of the vehicle. The guy you bought it off, had little idea of its history, as he bought it as it is today, and spent a few grand tidying it up. the original owner who first registered the vehicle, tells me it was made up from a bare shell, using numerous parts. So unfortunately, it is not an XU1, though it does have a fair few XU1 parts. I think to verify if the body is for sure you would need to locate the chassis number and decode it using the following article: http://home.exetel.c...the numbers.pdf
this article clearly shows that even the two tags you have are not XU1 tags, most likely it is a GTR.
Of course therefore I do not wish to purchase the vehicle, and given their value now, anyone who makes enquiries will probably come to the same conclusion I have. Nonetheless you only paid 8k for it, and thats not too bad for a mock up....If you want to sell it anyway id be prepared to pay around 10k for it.
Sorry about the stuff around but i needed to be sure. If you would like to discuss further feel free to give me a call. If you dont want to halve your price i understand..... and good luck with the sale.
GTR-1 PM me if you want further info, I purchased the VIR from your transport authority an actually spoke to the previous owner.....can forward it if you want the info..
Adam
#6
_Skapinad_
_Skapinad_
-
- Guests
Posted 11 April 2007 - 07:17 PM
also no lc xu1's were made before june 1970.... thanks MR nos....
and the dealer code 000 is export.
and the dealer code 000 is export.
Edited by skapinad, 11 April 2007 - 07:18 PM.
#7
_LGN347/24C_
_LGN347/24C_
-
- Guests
Posted 11 April 2007 - 07:24 PM
that vin no is 100% gtr only,as per info above,metsbac code 34203C0, but that ck eng would be very interesting. 
#8
_MRNOS_
_MRNOS_
-
- Guests
Posted 11 April 2007 - 07:25 PM
I know of 1 of the press cars that was a 69 model, and the 1st lc xu1 was a 69 model also
#9
_gtrtorana_
_gtrtorana_
-
- Guests
Posted 11 April 2007 - 07:25 PM
According to the Holden records, this car is a GTR, not XU1. It was built on the 20-10-69. The engine that is in it at the moment is not the original engine. It was an export car but the records do not state when it was sold or by who.
#10
_Skapinad_
_Skapinad_
-
- Guests
Posted 11 April 2007 - 07:35 PM
if someone explains to me how to post pictures, have about thirty of em....
#11
_MRNOS_
_MRNOS_
-
- Guests
#13
_nzgtrxu1_
_nzgtrxu1_
-
- Guests
Posted 11 April 2007 - 09:54 PM
and no XU1s were assembled at sydney ( H6 )
can you guys give me any dates on my GTR please 82911CH630781
can you guys give me any dates on my GTR please 82911CH630781
#14
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 12 April 2007 - 02:22 PM
Thanks for all the help guys, you guys might of saved me about 20k.that vin no is 100% gtr only,as per info above,metsbac code 34203C0, but that ck eng would be very interesting.
Even the engine might be a bit suspect, the head part number I got of this car is 7429461. "ck spec" engines had the head part number 2822072
#15
_Skapinad_
_Skapinad_
-
- Guests
Posted 12 April 2007 - 02:26 PM
also from memory, wasnt it missing its ADR tag ? the guy gave me some story about them not being issued with one, because it was shipped to nz and replaced with theirs? only going off memory, and its been a couple of months and a couple of thousand beers!!
#16
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 12 April 2007 - 02:50 PM
Yup. No ADR tag.also from memory, wasnt it missing its ADR tag ? the guy gave me some story about them not being issued with one, because it was shipped to nz and replaced with theirs? only going off memory, and its been a couple of months and a couple of thousand beers!!
I have been told be a couple of other people that all cars shipped to NZ from new never came with this tag.
I also e-mailed you about sending me that info on Heaths GTR car.
#17
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 12 April 2007 - 02:52 PM
Got your e-mailalso from memory, wasnt it missing its ADR tag ? the guy gave me some story about them not being issued with one, because it was shipped to nz and replaced with theirs? only going off memory, and its been a couple of months and a couple of thousand beers!!
Cheers
#18
_Skapinad_
_Skapinad_
-
- Guests
Posted 12 April 2007 - 02:57 PM
thats crap, the lj xu1 I bought has it on, and it has been there since it was shipped to NZ new.... not sure if LC's were any different, though I doubt it..... where there holes where it should have been....?
#19
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 12 April 2007 - 03:05 PM
Nope. No holes. But then again a welder can easily take care of that and the engine bay did have a paint job at some stage.thats crap, the lj xu1 I bought has it on, and it has been there since it was shipped to NZ new.... not sure if LC's were any different, though I doubt it..... where there holes where it should have been....?
Overall the car is not a bad looking waggon, it's in pretty good nic, no rust at all which is an added bonus.
#20
_Skapinad_
_Skapinad_
-
- Guests
Posted 12 April 2007 - 06:39 PM
pics... finally worked out how to do it.....!
#21
_rorym_
_rorym_
-
- Guests
Posted 12 April 2007 - 06:51 PM
Or internal use/sale as I found out.. Any GM execs cars and race cars went to dealer 000.also no lc xu1's were made before june 1970.... thanks MR nos....
and the dealer code 000 is export.
R
#23
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 13 April 2007 - 04:35 AM
The body number on the tag is 20239B and the number stamped into the lefthand side of the engine bay (near the air filters) is LC20239Bpics... finally worked out how to do it.....!
#24
GTR-1
-
- Members
-
- 351 posts
Forum Fan
- Location:Auckland, New Zealand
- Car:Phantom Grey 7/71 LC GTR.
- Joined: 11-April 07
Posted 13 April 2007 - 05:45 PM
If this car was assembled in Sydney (H6)and no XU1s were assembled at sydney ( H6 )
can you guys give me any dates on my GTR please 82911CH630781
Why does the body number indicate a Brisbane car? (20239B) isn't that what the B stands for?
#25
_nzgtrxu1_
_nzgtrxu1_
-
- Guests
Posted 13 April 2007 - 07:47 PM
because Brisbane is the body manufacturing plant hence the B & sydney H6 was the vehicle assembly plant. thats all sweet & they are similar in number sequences to the undisturbed tags on my 4/70 gtr. They will be a matching pair of tags even if they have been rerivoted. however that stamped chassis no by carbs should be around LC07***B & would NOT be similar to the body # on the paint tag at all. if it had had an ADR tag it too would be LC07***B but most NZ toranas were not fitted with ADR as NZs primitive rego system didnt req this. ( & it cant be returned to & rereg in aust without )
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
