I have just been asked to find out the length of the wire rod (I think links the clutch pedal) by a friend who wants to make sure the one he has is for LC-LJ and not HT-HG-HK. He has been caught out in the past, and has recently bought one at a swap meet from a guy he wasnt sure what it was out of.
Thanks in advance
Gav.
Rat Trap Clutch Rod
Started by
_NRV051_
, Feb 11 2008 07:42 PM
5 replies to this topic
#2
Bazza
-
- Members
-
- 4,295 posts
ǝɹnʇxıɟ ɯnɹoɟ
- Location:Outer Melb West Vic
- Car:ɐuɐɹoʇ
- Joined: 11-November 05
Posted 11 February 2008 - 08:19 PM
Hi
Measuring as best I could without jacking up the car - I get 17 inches or about 430mm. That includes the whole rod including the flat bit that attaches to the bell crank.
Hope this helps
Bazza
Measuring as best I could without jacking up the car - I get 17 inches or about 430mm. That includes the whole rod including the flat bit that attaches to the bell crank.
Hope this helps
Bazza
#3
gtrboyy
-
- Members
-
- 3,207 posts
Lotsa Posts!
- Location:SYDNEY,NSW
- Joined: 07-November 05
Posted 11 February 2008 - 11:09 PM
The thin rod that goes from the clutch pedal to the top of the rat trap?
I'll try to find my one in the shed & measure it later if I can.
I'll try to find my one in the shed & measure it later if I can.
#4
Bazza
-
- Members
-
- 4,295 posts
ǝɹnʇxıɟ ɯnɹoɟ
- Location:Outer Melb West Vic
- Car:ɐuɐɹoʇ
- Joined: 11-November 05
Posted 12 February 2008 - 12:03 AM
Hi
Sorry my mistake - must learn to read the thread properly. Obviously my university education has been wasted.
Bazza
Sorry my mistake - must learn to read the thread properly. Obviously my university education has been wasted.
Bazza
#5
frash da bucket
-
- Members
-
- 1,890 posts
Forum Fixture
- Location:NSW
- Joined: 23-April 07
Posted 12 February 2008 - 10:21 AM
Hi NRV051,the rod is 12 inches long,John.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
