LC LJ Grommets
#26 _les_
Posted 10 April 2009 - 12:09 AM
Les
#27 _ozbox_
Posted 12 April 2009 - 02:02 PM
I do not know what grommets or boots are needed that�s why I am asking this forum, if nothing is required that�s fine, but if something is needed for restoration please let us know. But please think carefully as it is expensive to make parts and I would not like to make ones that do not sell.
Les
i dont think you would lose on the handbrake rubbers les....most toranas are either missing them or they are rotten...currently i sell them at 25 each if they are good... second hand of course..
#28 _SableMet7/73_
Posted 11 August 2009 - 10:38 PM
Got a phone message yesterday from someone called Greg
from Rare Spares saying that the part I'd sent was in the mail.
I didnt speak to him so did he mean my old 1 was on its way
or is the new repro Washer Hose firewall gommet is on its way?
I only ask as had a call 5 or 6 weeks ago from someone else about
all these rubber samples I'd sent, I told him I'd only sent the 1 so
was a bit confusing.
Jono
Attached Files
#29 _SableMet7/73_
Posted 12 August 2009 - 10:08 PM
Got a envelope today from Greg Barker with a Washer
Hose/Firewall Grommet sample & a samples report sheet
to fill in, so all has been explained.
Will check the sample against the good 1 I have
as well as fitment of the hoses & firewall this weekend.
I'll fill in the report sheet & send it back when done.
Just looking at it tho, its pretty bloody spot on.
Cheers Jono
#30 _SableMet7/73_
Posted 20 August 2009 - 11:26 PM
As the above post says I got the sample of the LC/J
Windscreen Washer Hose Firewall Grommet from Greg
Barker,Product Sourcing & Developement Manager, of
Rare Spares.
I checked it out for fit & appearance the other day &
all looks good, heres some pics of it.
I just gotta fill out the sample report & send it back &
it should be available shortly I spose.
Jono
Attached Files
#31 _torry72_
Posted 08 October 2009 - 02:54 PM
#32 _SableMet7/73_
Posted 12 October 2009 - 06:35 PM
I saw the Washer hose grommet on Rares site recently listed under
new products comming soon. Think it was listed at $2 or $3.
Also had a Harness grommet listed, maybe the main wiring harness, no
pic or price but also available soon.
I see they also have the Exhaust/muffler hanger rubbers listed too.
Good 1 Les/Rares.
Cheers Jono
#33 _les_
Posted 13 October 2009 - 06:49 PM
The hose grommet is listed to be here end January but I am pushing for the end of November , the main wiring harness grommet we have not receive a suitable sample as yet, should be early next yearHi Glen
I saw the Washer hose grommet on Rares site recently listed under
new products comming soon. Think it was listed at $2 or $3.
Also had a Harness grommet listed, maybe the main wiring harness, no
pic or price but also available soon.
I see they also have the Exhaust/muffler hanger rubbers listed too.
Good 1 Les/Rares.
Cheers Jono
Les
#34 _les_
Posted 14 October 2009 - 01:20 PM
Just confirming grommet is sent mate... wiring loom grommet... along with another random one, may be something you already produce (if so you can bin it)... cheers
We have just recieved the first sample of the wiring grommet as soon as we test it I will send you one ,or if you are in a position to test it I will send you one now.
PM me you name and address so I can send it
Les
#35
Posted 23 April 2013 - 07:33 PM
Ok, Help me out here someone.
In the grommet kit whats the ribbed boot (1) for? The Kit image is below the pics as attached file.
In my firewall pics, Whats hole (A) & © for.
Correct me if i'm wrong, Hole ( is choke, Hole (D) Speedo Hole (E) is Reverse Light Switch wiring from gearbox.
Hole (F) i think is a ringin above washerhose/wiring loom grommet hole.
Thanks
Jaso
Attached Files
#36
Posted 23 April 2013 - 08:02 PM
G/day Jaso
Both items 1& 2 in the Rares grommet kit look like they are for the booster pushrod. No. 2 is the original type and I think boot No. 1 is actually for a HK,T,G brake booster pushrod, but not 100% sure.
In your pics, holes A, C & F are not factory.
#37
Posted 23 April 2013 - 08:10 PM
Hi Dave, thanks. I was wondering if anyone would see my post as its an old thread.
well the non factory holes get blank gromms & the ribbed boot gets the boot.
That has eased some of the confusion. I took most pics when stripping my car, but not those of whats in wot hole.
Jaso
#38 _Edan_
Posted 01 May 2013 - 03:03 PM
Good afternoon all,
We have now received and approved new off tool samples of Part No.:2806979 and 2806980, Hand Brake Cable Boots for LC LJ 6 Cyl Bucket Seat. Part No.: 2806980 also suits LC LJ 4 Cylinder. There's a picture below of the pre-production samples.
We should have the initial stock shipment within the coming months.
Edan Miller
RARE SPARES
#40 _LC870_
Posted 01 May 2013 - 08:08 PM
Hi there .
What about the grommet for LC - LJ Toranas where the reverse light switch harness passes through the transmission tunnel .
These are always stuffed .
I have an excellent original one here to copy from .
Regards LC870
#41 _Edan_
Posted 02 May 2013 - 09:45 AM
S Pack, see below a couple of pictures of the pre-production samples fitment testing. The boots have a very slight radius to them.
#42 _73LJWhiteSL_
Posted 18 June 2013 - 11:29 AM
Not sure if this is has been mentioned or not, but is there not a rubber plug in the bottom of the wheel arch tub? I vaguely remember it from my SL, but the only car I have now does not have it so I cannot check or supply a sample.
Steve
#43 _Nitter_
Posted 18 June 2013 - 05:58 PM
Peter
#44
Posted 18 June 2013 - 08:40 PM
Does anyone know where you can buy the grommet where the breather tube exits the boot floor?Peter
I might have a spare here if you want it ,otherwise it cones in the firewall kit
#45 _Nitter_
Posted 18 June 2013 - 10:23 PM
#46
Posted 18 June 2013 - 10:45 PM
I might have a spare here if you want it ,otherwise it cones in the firewall kit
Hi Grant
The pic Rare Spares has on their website doesn't show the small oval vent pipe grommet in the firewall grommet kit.
Has it been a later addition to their kit?
Cheers
Dave.
#47 _Edan_
Posted 19 June 2013 - 04:01 PM
http://www.rarespare...?product=FW1010
Top, third one along from left to right in the FW1010 web picture is the rear pipe grommet - 2805852. It's also in the FK1124 kit. The image on the web matched the shelf stock. Is this the one?
S pack/Dave, that particular grommet seems to have been in the FW1010 kit from the start according to the system here....
Regards,
Edan
Edited by Edan, 19 June 2013 - 04:03 PM.
#48
Posted 19 June 2013 - 04:53 PM
http://www.rarespare...?product=FW1010
Top, third one along from left to right in the FW1010 web picture is the rear pipe grommet - 2805852. It's also in the FK1124 kit. The image on the web matched the shelf stock. Is this the one?
S pack/Dave, that particular grommet seems to have been in the FW1010 kit from the start according to the system here....
Regards,
Edan
Hi Edan
2805852 is the fuel pipe grommet. The fuel tank vent pipe grommet is smaller and is not shown in that diagram.
Will see if I can find a diagram showing it in the parts book.
Cheers
Dave.
P.S You should receive a package in the mail soon.
#49
Posted 19 June 2013 - 05:06 PM
Edan, have a look at page 116 item No.4 in LJ parts catalogue M37127.
That is the fuel tank vent pipe grommet, unfortunately they don't show the grommet in detail.
#50 _les_
Posted 19 June 2013 - 07:44 PM
Les
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users