9 replies to this topic

[ls2lxhatch]

If you have McDonald Bros tubular arms then they will fit the mounting points if required. You could also make a bracket that clamps around the tubular arms to suit the factory swaybar. The LH/LX factory swaybar is the least effective design but gives the best clearance for exhaust.

The UC stay swaybar design is more effective and requires a thinner swaybar. K-MAC and Whiteline make UC style rear swaybars. I prefer the link mount on the K-MAC swaybar. K-MAC also make a rear mount adjustable rear swaybar however you will probably find it gets in the way or you exhaust.

You will find pictures on my website.

I you decide on the K-MAC adjustable or Whiteline then I have those for sale. I used the K-MAC UC stay swaybar.

Edited by ls2lxhatch, 26 March 2011 - 11:05 AM.

[ls2lxhatch]

If you decide to use the LX swaybar then it is worth considering moving the mount points back around 10 mm to clear a 9". It would be best to trial fit and mark the position as there are many different housings.

[Toranamat69]

Wish you were in Brissy Andy - I want to get one of the rear mount adjustable k-mac ones to change from the whiteline UC type I have. Probably not worth shipping it across the desert though.

I am probably too far from SLRlover for him to be interrested in mine either.

[adgjl7]

If you have McDonald Bros tubular arms then they will fit the mounting points if required. You could also make a bracket that clamps around the tubular arms to suit the factory swaybar. The LH/LX factory swaybar is the least effective design but gives the best clearance for exhaust.

The UC stay swaybar design is more effective and requires a thinner swaybar. K-MAC and Whiteline make UC style rear swaybars. I prefer the link mount on the K-MAC swaybar. K-MAC also make a rear mount adjustable rear swaybar however you will probably find it gets in the way or you exhaust.

You will find pictures on my website.

I you decide on the K-MAC adjustable or Whiteline then I have those for sale. I used the K-MAC UC stay swaybar.

hi i was also looking at these sway bars but the dealer here cant tell me if they will fit on a nine inch diff in a lx torana wondering if you have tryed them or know thanks

[ls2lxhatch]

The are many different styles of 9" housings, the K-MAC and Whiteline UC style swaybars will fit with most if not all 9" housings. You need to measure the diameter of the axle tubes and order with u-bolts to suit.

Whiteline on 9"


K-MAC on 9"



From memory the K-MAC rear mount adjustable rear swaybar clears the 9". Worst case scenario you could fit spacers.

K-MAC rear mount adjustable on banjo.

[adgjl7]

thanks heaps