Has any one out there got any detailed photos of where to run the wiring harness especially where it goes through the fire wall? In the process of wiring it up and interested to see how different people have done this, to see where they've ran the harness, where theyve put the harness through the fire wall to the computer and how theyve changed the wiring for alternator (opposite side of engine)etc, I'm running a standard VN loom, standard injection set up and want it to be a neat job
EFI 5 litre into lx wiring harness
Started by
_stigga_
, Jul 03 2013 04:02 PM
3 replies to this topic
#2
Neils LX
-
- Members
-
- 2,074 posts
Forum Fixture
- Name:a
- Location:North west NSW
- Joined: 18-March 07
Posted 03 July 2013 - 05:29 PM
Sorry dont have a detailed photo of harness throu firewall but this is where mine goes, standard VN loom mounted with CAE under dash harness (map sencer, ingnition module and relays)
As 1st installed
with VT covers battry side changed and airbox moved
How one looks in my old VR BT1
Sorry enginebays not painted yet but with fuel filter and fan shroud moved should be fairly clutter free. Alternator is as mounted in Toranas
#3
UCgazman
-
- Members
-
- 1,343 posts
UC's FTW!
- Name:Garth
- Location:Perth
- Car:UC S̶u̶n̶b̶i̶r̶d̶ 5000!
- Joined: 04-August 11
Posted 03 July 2013 - 05:46 PM
Here's mine going through the firewall with original Commo bung -
I made my own harness and mounted relays etc in the engine bay -
#4
_stigga_
_stigga_
-
- Guests
Posted 03 July 2013 - 09:35 PM
Thanks guys, I like the way you've hidden it all under the dash Neils LX, looks good, I've got a V6 conversions loom and aren't sure where to mount relays etc, thought I'd check with people like you guys who've done it before, before I start drilling holes etc. UC Gazman that was where I thought I'd run the loom through the fire wall, seemed like the most logical place, thanks heaps
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users
