6 replies to this topic

[sibhs]

Hi Guys, can some one give me the measurements for the hole in the inner guard that the booster support rod fits too. Please measure from centre of hole to first crease down then same again to first crease near hinge. Must be a small booster like pictured. Cheers. Marty sorry don't think picture works. You know which booster I mean any way. http://www.gmh-toran...attach_id=35100

Edited by sibhs, 17 November 2013 - 11:37 PM.

[Ice]

I will measure mine tomorrow for you marty

Yeah pics worked

[Ice]

Marty its 15mm from the bottom crease and 65 mm from the box section that the hinges bolts to
give me a call if you like tonite
cheers gene.

[sibhs]

Thanks Gene.

Can someone elses car be measured because I have had two answers and they're both different.  

 

Cheers

Marty

[sibhs]

Bump

[limo]

Marty its 15mm from the bottom crease and 65 mm from the box section that the hinges bolts to
give me a call if you like tonite
cheers gene.

I would agree with these measurements, that's to centre of the hole as I measured

[sibhs]

Thanks Limo and Gene.