Clutch inspection cover screws
#1
Posted 02 November 2014 - 02:51 PM
I've got a mismatch of fixings for my 202 cover. Can any one confirm which ones are correct? And were they go. Even a photo of correct would be good.
Cheers
Marty
#2
Posted 02 November 2014 - 03:14 PM
I think its B Marty.
I sent some to another member once.
#3
Posted 02 November 2014 - 03:18 PM
#4 _Macca97_
Posted 02 November 2014 - 03:23 PM
ive only ever seen C marty, but i could be wrong
#5
Posted 02 November 2014 - 03:47 PM
'B'.- bolt and lockwasher assembly.
Pan head 1/4 inch 20 x7/16 with external lock washer - SP 1672.
#6 _judgelj_
Posted 02 November 2014 - 04:11 PM
A with B's washer.
#7
Posted 02 November 2014 - 04:15 PM
#8
Posted 02 November 2014 - 04:16 PM
#9
Posted 02 November 2014 - 05:21 PM
1 is a bigger hole than 2 & 3. So I think it's B in one and either A or C in 2 & 3.
#10
Posted 02 November 2014 - 05:24 PM
a and b i think?
#11
Posted 02 November 2014 - 05:29 PM
Ive just gone out and crawled under the Goon and what Troy says is what I have.
Be aware that its a 1970 HT and not necessarily correct for your car.
#12 _Macca97_
Posted 02 November 2014 - 08:41 PM
both my Hj's and wb and the old hq wagz i just did a service on had b and c :/ maybe they used whatever was in the factory
#13
Posted 02 November 2014 - 08:47 PM
all phillips head but 2 different sizes
#14
Posted 02 November 2014 - 09:03 PM
#15
Posted 02 November 2014 - 09:05 PM
1/4" UNC and 5/16" UNC
But phillips heads
#16
Posted 03 November 2014 - 12:45 PM
73 HQ parts catalogue lists- 9416367.
pan head cr.recess 1/4-20 but 1/2 inch long .
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users