Community Status Updates
Potta → sainters
Hi Sainters,
Do you still need a grill?
And do you need a good one or a perfect one?
I have one that will do if you need one, but its got a few bent wires in it.
Let me know if you're interested.
Thanks
Craig.
Oct 08 2011 07:16 PM
Do you still need a grill?
And do you need a good one or a perfect one?
I have one that will do if you need one, but its got a few bent wires in it.
Let me know if you're interested.
Thanks
Craig.
→ torry nut
gday mate, my names adrian howard! you apparently know where my lc gtr came from! its plumdinger purple, went up Mackay way bought from brisbane from a bloke with ref to MARTY!! Some one must KNOW what the go is with this car! has an int history!! Original post is under INFO WANTED, User AJhoward thx adrian Howard Any help m,uch App. 0488345569
Aug 29 2011 07:44 AM
ant285 → el_jay_72
hey mate, just noticed you have/ had showwheels streeters 17" on ur lj. im thinking of putting some on my lj. did you have and rubbing issues? have you got lowered springs, what size tyres, etc. any info you have to help me would be appreciated.
cheers ant
Aug 28 2011 07:46 PM
cheers ant
DanWA
due to family heath reasons i havent test fitted it with the box just yet... ecu/loom were sourced locally from a wreck and been sent over to sideshowperformancewiring
Jul 28 2011 05:15 PM
DanWA
i'm using a msd5096 starter with custom pipes and 2 steering knuckles... plenty of room
Jul 20 2011 10:14 PM
DanWA
3~mm off the crossmember
TCI Flexplate i give part number for in LS1 Conversion thread and speedo will either be a normal t400 > torana cable or if the tuner wants signal some sort of custom box will be needed
Jul 20 2011 09:23 PM
TCI Flexplate i give part number for in LS1 Conversion thread and speedo will either be a normal t400 > torana cable or if the tuner wants signal some sort of custom box will be needed
DanWA
Haven't actually had the box in it yet mate but i can't see there being any problems. I am running a built/manualised T400 from DTM (Dimoff)... rodshop cross member, TCI flexplate, Allfast converter and b&m rhd megashifter
Jul 20 2011 06:54 PM