Javascript Disabled Detected

You currently have javascript disabled. Several functions may not work. Please re-enable javascript to access full functionality.

Pro Street LC torana

Started by _pro386_ , Nov 05 2006 05:41 PM

Next

Please log in to reply

27 replies to this topic

#1 _pro386_

Guests

Posted 05 November 2006 - 05:41 PM

Heres a pic of the start of my pro street torana. Its going to have a blown 386ci small block chev in it out of my hk monaro which used to be 8/71 on it when it was in a circuit boat. I've got 15x3.5 and 15 x 14 aluma star wheels for it already as well as 4 link brackets, bars and shocks etc. I'm going to paint it Red hot which is a VZ commodore colour.

Posted Image

Back to top

#2 _pro386_

Guests

Posted 05 November 2006 - 10:01 PM

This is a pic of the four link brackets i got from Ken Lowe and the strange shockers i got from VPW. I look at mcdonald bros brackets but i liked the prostock style allowing the sway bar to be mounted to the top of them instead welding another bracket to the diff for that as well
Posted Image

Back to top

#3 _dave720gtr_

Guests

Posted 05 November 2006 - 10:18 PM

hi mate the monaro looks well look after nice ! u need the good gear if you want to get the power down,for link looks the goods . should hook up well with that size rubber under it :spoton:

cheers

Back to top

#4 _pro386_

Guests

Posted 05 November 2006 - 10:24 PM

I'm painting the monaro at the moment as well i've just put together a 6inch roded 350 for it to replace the 386 cuber i took out for the torana. I put a half chassis in a 4 door LC and the guy that had the monaro wanted it so i did a swap. I've learnt a few more things about chassis now so i'll make this one a little better. I'm going to paint them both the same colour so i think the monaro will be a cool tow car for the torana at the drags.

Back to top

#5 _Monkey_

Guests

Posted 05 November 2006 - 11:02 PM

cany wait to see it when its finished :spoton:

Back to top

#6 _pro386_

Guests

Posted 06 November 2006 - 05:13 AM

I will be posting pics as i go through the build of the chassis

Back to top

#7 _pro386_

Guests

Posted 19 November 2006 - 09:44 PM

I've put HQ stubs and discs on the torana and fitted my Weld aluma star wheels with front runners. Haven't got a lot done due to working on the monaro as well. Next step is cutting out the firewall and dummy fitting the engine and box and getting the car sitting where i want it before i cut out the rest of the floor etc.
Posted Image

Back to top

#8 Tiny

Oh My, Don't you post alot

Administrators
10,018 posts

Name:Tiny
Location:Sydney
Joined: 04-February 07

Posted 19 November 2006 - 09:48 PM

Looking good!

What are the plans chassis wise? Tubs and Cage?

Back to top

#9 _pro386_

Guests

Posted 19 November 2006 - 09:52 PM

I'm coping a SFI 25.2 3/4 chassis for this one so it'll be pretty well the same as any current prostock chassis from the midplate back with twin chassis rails pretty much the same as in the MR MAD torana but mine will be just out of mild steel.

Back to top

#10 _chevy_253_torana_

Guests

Posted 19 November 2006 - 10:06 PM

looking good post up on the monaro as well mate!!!!!

monaros and toranas really are the

BEST OF BOTH WORLDS!

Back to top

#11 _RpM_

Guests

Posted 19 November 2006 - 10:20 PM

Yeeaaa haaaa... looking unreal mate, make sure you continue to keep us posted!!

Back to top

#12 Tiny

Oh My, Don't you post alot

Administrators
10,018 posts

Name:Tiny
Location:Sydney
Joined: 04-February 07

Posted 20 November 2006 - 06:00 PM

Sounds excellent mate! As the guys have said.. keep us posted!

Back to top

#13 _pro386_

Guests

Posted 21 November 2006 - 07:46 PM

I've measured up the spacing between tyres i've got on my current rims. They are 33 x 17 x 15 which are 21 inchs side wall to side wall. With this width i won't have enough room to get the weld on the inside of the fourlink bracket closed to the diff centre. Luckily i Got a pair of 33 x 15 x 15s off Kerry Treymane which would of come off one of their prostock cars. They've done 20 passes with heaps left on them for $100. You've got to get a bargain sometimes. :rockon:

Back to top

#14 _pro386_

Guests

Posted 27 December 2006 - 08:11 AM

Heres a couple pics of progress of the monaro from before christmas. I think the pic says it all.
Posted Image

The headers are Hedman S10 truck headers i got from Jegs in the states with some other stuff. They ended up being only $205 AUS delieved to my door.

Back to top

#15 _pro386_

Guests

Posted 09 December 2007 - 02:41 PM

Haven't done much to both cars for a while due to working away but now i'm home everynite so i try to put an hour in each nite in the shed. I've got the rear floors and inner guards out of the torana and started to stretch the wheel arches to allow for the 33 inch tall tyres.I'm pretty happy with the way their turning out.

Back to top

#16 _adamlcgtr383blownchev_

Guests

Posted 09 December 2007 - 04:05 PM

Nice work so f mate, can't wait to see it in the flesh, keep going! :spoton:

Back to top

#17 _torana_kid_

Guests

Posted 09 December 2007 - 05:13 PM

looking nice mate, keep the the good work coming,

Back to top

#18 toryman76

Forum Fixture

Members
1,082 posts

Location:Melbourne, Vic
Joined: 16-January 06

Posted 09 December 2007 - 05:24 PM

thats MONSTER rubber!!!! :tease:

Back to top

#19 Heath

I like cars.

Administrators
18,380 posts

Name:Heath
Location:Eastern Suburbs, Melbourne
Car:Heavily Modified UC Sunbird Hatchback
Joined: 07-November 05

View Garage

Posted 09 December 2007 - 07:27 PM

Wow that is big lol. Great work

Back to top

#20 _pro386_

Guests

Posted 09 December 2007 - 09:53 PM

Thanks guys. i'm trying to do as much a can on both cars. I had some lite fingered prick take some stuff from my shed so thats made me have a break from the cars a while. So the monaro is getting the 307 back in it for a neat streetable cruiser. Lucky all the long engine for the torana where at the engine builders. Anyway pays to lock your shed where ever u live.

Back to top

#21 _pro386_

Guests

Posted 14 February 2008 - 07:51 PM

Haven't done much to the torana lately as been flatout finishing the paint on the monaro. My fourlink brackets are Junk so i'll have to get another set. Got them from a place that used to build a lot of dragsters and altereds so i thought they would be good to deal with. I was so wrong. :furious:

. Any way heaps a pic of it at the moment.
Posted Image

Back to top

#22 _NURVUS_

Guests

Posted 14 February 2008 - 09:38 PM

Looking good mate. Big rubber just seems to suit these cars really well. :spoton:

Back to top

#23 _Pete_

Guests

Posted 14 February 2008 - 09:42 PM

Looks like a cool Wheelstander in the making with that rear rubber!!!

Top stuff, should look great when finished!!

Back to top

#24 _MidLife_

Guests

Posted 15 February 2008 - 06:29 AM

OK,
so now you offically have my undevided attention! :clap:

i have a good mate just down the road who can compliance the HK for ya as well mate. ( hes got 4 or 5 HK's behind his shed is various stages of decay )

i also have a mate who imports twin T4 turbo kits, everything ya need to fit and fire he gets then n from the states for squat!!!!

Regards, Midlife. :rockon:

Back to top

#25 _pro386_

Guests

Posted 15 February 2008 - 06:48 AM

Midlife, I get my own stuff from he states saves being ripped off by the middleman. If their the turbo setups arethe ones u see on ebay. They don't fit HK's or toranas but I have helped a mate put a set on a HQ which they only just fit. I make my own stuff as a lot of this stuff the header plates are to thin and end up warping. Get more satisfaction doing it yourself anyway. Cheers Mick