pitty about the ugly car there storing behind the glass
1 votes
The Shed Thread
Started by
Tiny
, Jun 01 2007 04:49 PM
878 replies to this topic
#351
_nial8r_
_nial8r_
-
- Guests
Posted 16 December 2010 - 06:44 AM
#352
_bloosted_
_bloosted_
-
- Guests
Posted 20 December 2010 - 06:26 PM
well thanks to BIGFELLA for his contact i got me hoist installed and finally my shed is almost complete
the torana dirtcircuit car is outside and the ute isn't mine but the XY is ( i'm a brand slut sorry)
the torana dirtcircuit car is outside and the ute isn't mine but the XY is ( i'm a brand slut sorry)
#353
_Liam_
_Liam_
-
- Guests
Posted 01 January 2011 - 07:09 PM
Hi Dirtbag,
Love your shed too! What is the size & specs for your shed? Especially eave & apex height, roof pitch etc.
I,m doing mine next year & weighing up whether it's cheaper to go factory kit eg. Titan etc. or I'll custom fabricated & sheet it myself.
I may not get what I want in kit form.
At 10 degrees pitch, 3.3m eave 4.0m apex.
If you can get a kit contents list, go shopping you could probably get it infinitely cheaper. Especially if you go to 2nd hand dealers and scrappers, you can get 2nds for less than half price.
Depends if you want to wait while you shop around.
#354
_studricho_
_studricho_
-
- Guests
Posted 08 February 2011 - 07:16 PM
Well after 7 months fighting with council to build my garage it looks like I've pushed to far.
Apparently Dear cock gobbler and get you head out of your arrse long enough to see what is going on is offensive. I may have added some threats in the same email after finally cracking with no response from council.
I have my local member looking into the issue, solicitor and my appointed certification person.
According to the police I can now only correspond via my solicitor.
What blew my fuse finally was talking to the neighbor that has had his large shed passed in 4 weeks and no special conditions. Council wanted me to pay them $5,785 just so I can run a pipe behind me into the creek. All of 1.5 metre pipe.
Yes, I've contacted today tonight and a current affair. I also have contacted my local paper.
The shed (20m long by 7m wide by 3.6m High) along with the mezzanine floor, skylights and an internal divider (including second roller door) is sitting in the factory ready to go.
I'm absolutely devastated to say the least.
Apparently Dear cock gobbler and get you head out of your arrse long enough to see what is going on is offensive. I may have added some threats in the same email after finally cracking with no response from council.
I have my local member looking into the issue, solicitor and my appointed certification person.
According to the police I can now only correspond via my solicitor.
What blew my fuse finally was talking to the neighbor that has had his large shed passed in 4 weeks and no special conditions. Council wanted me to pay them $5,785 just so I can run a pipe behind me into the creek. All of 1.5 metre pipe.
Yes, I've contacted today tonight and a current affair. I also have contacted my local paper.
The shed (20m long by 7m wide by 3.6m High) along with the mezzanine floor, skylights and an internal divider (including second roller door) is sitting in the factory ready to go.
I'm absolutely devastated to say the least.
#355
_LS1 Hatch_
_LS1 Hatch_
-
- Guests
Posted 10 February 2011 - 12:45 PM
Here's my shed....wish it was bigger, but I've built a couple cars in it and still make do ! 
It's still pretty good sized for this area at least. Gives me room to work on the car and have abit of junk jammed in all over the place, lol.. have a little metal shed in the back yard (about 11 foot by 13 foot) jammed with more spares.
It's still pretty good sized for this area at least. Gives me room to work on the car and have abit of junk jammed in all over the place, lol.. have a little metal shed in the back yard (about 11 foot by 13 foot) jammed with more spares.
Attached Files
-
037 (13).JPG 1.94MB
9 downloads
-
018.JPG 539.86K
11 downloads
-
005.JPG 556.05K
9 downloads
Edited by LS1 Hatch, 10 February 2011 - 12:46 PM.
#356
Heath
View Garage
-
- Administrators
-
- 18,368 posts
I like cars.
- Name:Heath
- Location:Eastern Suburbs, Melbourne
- Car:Heavily Modified UC Sunbird Hatchback
- Joined: 07-November 05
View Garage
Posted 10 February 2011 - 04:12 PM
I'm from Melbourne and I've never even heard of "Carlton Light". You need to upgrade that sticker to a "Carlton Draught" one.
Seriously though, nice shed. Can't wait til I have a shed! hahaha
Seriously though, nice shed. Can't wait til I have a shed! hahaha
#357
_LS1 Hatch_
_LS1 Hatch_
-
- Guests
Posted 11 February 2011 - 01:38 AM
It's a kinda old sticker, ha ha... 
#358
Potta
-
- Members
-
- 6,026 posts
Oh My, Don't you post alot
- Name:Craig
- Location:Gozzy, WA
- Car:LC GTR, LC 4 door
- Joined: 01-May 09
Posted 31 March 2011 - 07:03 PM
My New shed 12 months in the making from organising finance to getting it put up.
Finally its here
Plenty of Room!!
Will 2 Toranas fit?
Yep,Two and a boat fit EASY!!!
How Bout 3??
Not so much room now though.
Should be all good though cause I should be down to 1 plus parts pretty soon!! (If you ask my wife she'll tell you what 'soon' means
)
I've got a pic showing the gap between the boat and the Red torrie but it didn't upload. Maybe tomorrow.
Lets just say its tight!
Finally its here
Plenty of Room!!
Will 2 Toranas fit?
Yep,Two and a boat fit EASY!!!
How Bout 3??
Not so much room now though.
Should be all good though cause I should be down to 1 plus parts pretty soon!! (If you ask my wife she'll tell you what 'soon' means
)I've got a pic showing the gap between the boat and the Red torrie but it didn't upload. Maybe tomorrow.
Lets just say its tight!
#359
Potta
-
- Members
-
- 6,026 posts
Oh My, Don't you post alot
- Name:Craig
- Location:Gozzy, WA
- Car:LC GTR, LC 4 door
- Joined: 01-May 09
Posted 31 March 2011 - 07:06 PM
Couple more pics to come that didn't upload.
Edited by Potta, 31 March 2011 - 07:09 PM.
#360
_gen3torrie_
_gen3torrie_
-
- Guests
Posted 31 March 2011 - 07:10 PM
well my shed is finally coming together after almost 5 years me and a mate whos a patio builder, same mate who helped my trans tunnel in the ute. new workbenches and huge shelfs at the back and high shelfs all the way around above head view so no smashing your head and no smashing the door, its never been better, the ute and the torry will fit in there snug as a bug.
#361
Potta
-
- Members
-
- 6,026 posts
Oh My, Don't you post alot
- Name:Craig
- Location:Gozzy, WA
- Car:LC GTR, LC 4 door
- Joined: 01-May 09
Posted 31 March 2011 - 07:17 PM
Pics Josh. If there's no pics it didn't happen 
That line of reasoning has saved my butt on several occasions.
That line of reasoning has saved my butt on several occasions.
#362
_Quagmire_
_Quagmire_
-
- Guests
Posted 31 March 2011 - 07:37 PM
it don't count if it's your dad paying the bills and morgage m8t 
mine ain't pic worthy
acually it's a pagola the garage got tuned into a games room before i brought the place
i do have a garden shed full of assorted crumpledoor fraurd and stato parts but
mine ain't pic worthy
acually it's a pagola the garage got tuned into a games room before i brought the place
i do have a garden shed full of assorted crumpledoor fraurd and stato parts but
#363
Potta
-
- Members
-
- 6,026 posts
Oh My, Don't you post alot
- Name:Craig
- Location:Gozzy, WA
- Car:LC GTR, LC 4 door
- Joined: 01-May 09
Posted 31 March 2011 - 10:59 PM
A couple during construction.
New Driveway too!!
Like I said before, its a bit of a tight squeeze but all 3 cars are in the shed
And THAT is why I have no money
New Driveway too!!
Like I said before, its a bit of a tight squeeze but all 3 cars are in the shed
And THAT is why I have no money
#364
MRLXSS
-
- Members
-
- 12,400 posts
The Render Garage
- Name:Matt
- Location:Upwey, Melbourne
- Car:355 LX Hatchback, DeLorean DMC-12, LX SS Hatch, VY Cross8 Crewman
- Joined: 09-November 05
Posted 20 April 2011 - 02:05 PM
Looks Good Potta!!!
How the hell are you suppose to work on those cars?
How the hell are you suppose to work on those cars?
Edited by MRLXSS, 20 April 2011 - 02:07 PM.
#365
Potta
-
- Members
-
- 6,026 posts
Oh My, Don't you post alot
- Name:Craig
- Location:Gozzy, WA
- Car:LC GTR, LC 4 door
- Joined: 01-May 09
Posted 23 April 2011 - 12:07 AM
I'm stripping the black one soon so there will only be two in there which will be better. At the moment there is a torrie and a hilux and the other two are where the hilux usually lives. The three cars in there was only ever temporary.
#366
_studricho_
_studricho_
-
- Guests
Posted 30 April 2011 - 09:59 PM
I'm still waiting for council. June 14 2010 was when the modification plans for the approved DA went in. i was assured 2-4 weeks tops. Looks like I will have my new shed sitting on my driveway as the shed place will no longer keep it there.
#367
_niterida_
_niterida_
-
- Guests
Posted 30 April 2011 - 11:04 PM
I have just finished setting my shed up so I thought I would share a couple of photos.
Unfortunately I am out of Toranas and back into Subaru's. The Brumby in the photo is destined for a 13B Turbo and WRX AWD running gear :-)
Unfortunately I am out of Toranas and back into Subaru's. The Brumby in the photo is destined for a 13B Turbo and WRX AWD running gear :-)
#368
DanWA
-
- Members
-
- 2,440 posts
Forum Fixture
- Location:Southwest W.A
- Car:LS1 LX 4 Door
- Joined: 27-April 06
Posted 01 May 2011 - 10:31 AM
so its going to go brap brap bang (broken gearbox)
#369
_niterida_
_niterida_
-
- Guests
Posted 01 May 2011 - 11:32 AM
so its going to go brap brap bang (broken gearbox)
hehehehe possibly :-(
But no it won't be going brap brap fora long time - will be keeping the motor standard so the box should hold with my sympathetic driving style. The plan is that once it is up and running and reliable then I may look at making it go brap brap, depending on money and then when the box does go bang I will put a 6 speed in it - cos in 10years time when I have done all this 6 speeds will be $500 :-)
#370
_toranatime_
_toranatime_
-
- Guests
Posted 06 July 2011 - 09:41 PM
i love your collection of lc'sMy New shed 12 months in the making from organising finance to getting it put up.
Finally its here
Plenty of Room!!
Will 2 Toranas fit?
Yep,Two and a boat fit EASY!!!
How Bout 3??
Not so much room now though.
Should be all good though cause I should be down to 1 plus parts pretty soon!! (If you ask my wife she'll tell you what 'soon' means
I've got a pic showing the gap between the boat and the Red torrie but it didn't upload. Maybe tomorrow.
Lets just say its tight!
looks like you have a bit of work ahead of you mate. it would be very fun!
have fun with your new shed and awesome collecton of lc's
#371
RJTVX23
-
- Members
-
- 20 posts
Forum Participant
- Name:rob
- Location:toowoomba
- Car:73 LJ two door
- Joined: 04-July 11
Posted 10 July 2011 - 04:21 PM
I am a new member thought I would show ome pics of my shed for a start.
This is a 9m x 7.5 m 3.2 high (I think ) high enough for hoist any way with a 2.6 m x 6m mezzanine floor, also have a 10m x 6m shed for road cars/mower ect with a 6m x 3m carport, and Its still not enough!!
This is a 9m x 7.5 m 3.2 high (I think ) high enough for hoist any way with a 2.6 m x 6m mezzanine floor, also have a 10m x 6m shed for road cars/mower ect with a 6m x 3m carport, and Its still not enough!!
Attached Files
-
100_1799.JPG 335.33K
7 downloads
-
100_1800.JPG 287.76K
4 downloads
#373
RJTVX23
-
- Members
-
- 20 posts
Forum Participant
- Name:rob
- Location:toowoomba
- Car:73 LJ two door
- Joined: 04-July 11
Posted 25 August 2011 - 08:53 PM
is that a saloon car?
yep , a speedway car Vx commodore with a worked v6 ecotech, runs a haltech, worked head ,roller rockers, balalnce big pistons, spool rods, billet roller camshaft, extractors, blue top injectors lightflywheel and clutch around 252 rwhp, I have a home made IRS nine inch diff in it and it runs a T5. in a class called Modified production
#374
Potta
-
- Members
-
- 6,026 posts
Oh My, Don't you post alot
- Name:Craig
- Location:Gozzy, WA
- Car:LC GTR, LC 4 door
- Joined: 01-May 09
Posted 29 August 2011 - 03:04 PM
i love your collection of lc's
looks like you have a bit of work ahead of you mate. it would be very fun!
have fun with your new shed and awesome collecton of lc's
Yep, plenty of work to be done.
The orange one is sold, the black/green one is rusted out but has pretty good running gear, and the white one is an LJ that was going to get the running gear from the orange one.
The plan now is to get the red one painted up and put the running gear from the black one in it. It is licensed and has a reasonable interior and not much rust as far as I can tell.
Build thread will get put up soon but I don't have a lot of spare time or $$ so it will be a long build I think.
#375
_GTR_069_
_GTR_069_
-
- Guests
Posted 06 November 2011 - 06:20 AM
Wow read this from start to finish need to get back to shed and finish my tidy up and setting up new layout but have a question about hoist, hoping i would find some info in thsi thread will post a seperate thread too to get more info as im buying very soon, like next week
I am looking at buying this side of xmas and seen LIFT KING at All Holden Day every year very impressed with them, but whats some pros and cons to look out for and what do some of you guys have
There is also Tuff lift and loads of chaper looking ones on market
Features I am after 4 post for storage and under car access, like to have drip trays all the way along cause it will be sitting over another car daily
average 4.5 - 4.8m long cause i am putting racking in front of lift for part storage
Is lift king and tuff lift american or chinese?
The ones on ebay some of them scre me they look cheap
Only lifting a HK Monaro or the GTR nothing massive
Thanks
GTR
I am looking at buying this side of xmas and seen LIFT KING at All Holden Day every year very impressed with them, but whats some pros and cons to look out for and what do some of you guys have
There is also Tuff lift and loads of chaper looking ones on market
Features I am after 4 post for storage and under car access, like to have drip trays all the way along cause it will be sitting over another car daily
average 4.5 - 4.8m long cause i am putting racking in front of lift for part storage
Is lift king and tuff lift american or chinese?
The ones on ebay some of them scre me they look cheap
Only lifting a HK Monaro or the GTR nothing massive
Thanks
GTR
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
