Slr 5000 Rep!
#51 _2wild4u_
Posted 10 August 2008 - 09:22 PM
#52 _HatchmanSS76_
Posted 11 August 2008 - 02:08 PM
#53 _rookie_
Posted 11 August 2008 - 04:41 PM
I drove the car to the exhaust shop today, first time i have driven it ever I'm stoked!!
they are doing twin pipes from my headers to just in front of the rear wheels and handbrake setup for the comonwhore disks. there also rekitting the front callipers and gen checking the car over for me.
Kudu will have to catch up for a beer if Im ever up that ways for sure. I can't wait for beach hop.
cheers
Nick.
#54
Posted 12 August 2008 - 07:14 AM
Kudu will have to catch up for a beer if Im ever up that ways for sure. I can't wait for beach hop.
Are you going?? I would love to get up there! I would love to go but think I would need a new mortgage to pay for the gas! Closer to home we have the Americana weekend in New Plymouth, but I don't have a yank tank to go to that with.
#55 _rookie_
Posted 12 August 2008 - 04:13 PM
Are you going?? I would love to get up there! I would love to go but think I would need a new mortgage to pay for the gas! Closer to home we have the Americana weekend in New Plymouth, but I don't have a yank tank to go to that with.
#56 _rookie_
Posted 12 August 2008 - 04:33 PM
Are you going?? I would love to get up there! I would love to go but think I would need a new mortgage to pay for the gas! Closer to home we have the Americana weekend in New Plymouth, but I don't have a yank tank to go to that with.
opps dont know what went on there^^
Yeah going up for sure, already saving for it, and have already got accomodation sorted. Its going to be a huge drive with three kids under 4 years old lol just as well I can tune out to the sound of the v8
#57
Posted 12 August 2008 - 08:10 PM
opps dont know what went on there^^
Yeah going up for sure, already saving for it, and have already got accomodation sorted. Its going to be a huge drive with three kids under 4 years old lol just as well I can tune out to the sound of the v8
Cripes! I have two under 3 and a 10 year old and there would be no way I could fit al the stuff the wife would want to take in the boot of the torana. Are you towing a trailer??
#58 _rookie_
Posted 12 August 2008 - 08:34 PM
Cripes! I have two under 3 and a 10 year old and there would be no way I could fit al the stuff the wife would want to take in the boot of the torana. Are you towing a trailer??
hmmm..I better cut more outa the gaurds
#59 _rookie_
Posted 16 August 2008 - 01:43 PM
exhaust and other little niggly bits done. On the way home my trans got hot as im only runing oil thru the bottom of the radiater so oil cooler is next on the list after I recover from the bill for the exhaust.
#60 _rookie_
Posted 23 August 2008 - 05:54 PM
Not sure on window tints yet, what do ya think, put em on or leave them as is?
Took my boys (2 and 3 years) for a run up the road and back today, just a boys trip
#61 _rookie_
Posted 04 September 2008 - 08:42 PM
I tacked it then finished with sikaflex.
#62 _LJ355_
Posted 04 September 2008 - 09:30 PM
How the fook did you get it in the house
#63
Posted 04 September 2008 - 09:52 PM
#64 _rookie_
Posted 04 September 2008 - 10:27 PM
#65 _rookie_
Posted 17 December 2008 - 04:54 PM
do I need to upgrade my springs and shocks for cert? and any other little snags you can think of that I may need to take care of before I take her in? certs for 308, th350, 9 inch, commy rear disks and hq front (its rts) also should I box the lower trailing arms before cert?? Im sure plenty of you have been here before me so any tips would be great.
Cheers
Nick.
#66 _uncleian_
Posted 17 December 2008 - 05:47 PM
i am sure sum1 will correct me if i am wrong.............
Ian
#67
Posted 17 December 2008 - 07:07 PM
#68 _rookie_
Posted 17 December 2008 - 08:23 PM
not sure on this ,but i didnt think you could have the pipes comming out the sides like that on a 4 door.
^ In Australia, correct. I'm unsure about NZ
Yeah I know most garages don't like the pipes infront of the rears here too unless you can get them like 200mm away from the door opening or something but I really wanted that look so asked the guy whos going to do the cert and he's sweet with it much to my suprise, just cant get it certed anywhere but there.. hmm maybe hes onto something lol.
Do you think I should put a driveshaft loop on before I take it in? it cant hit the deck becouse the exhaust sits under it but???
#69
Posted 17 December 2008 - 08:28 PM
#70
Posted 17 December 2008 - 09:52 PM
If you've made any driveline modifications definitely put a loop in and make sure it is a proper one - I got mine certed recently and got caught out with this.
#71 _rookie_
Posted 13 April 2009 - 06:46 AM
Rekit proportioning valve, new hq vented front rotors drilled for the two stud patterns same as the rear so I can fit torana wheels and hq, drive shaft loop, thru some new back tyres on, new low a9x spec king springs (sits way better now, folded cover for fan, new front brake lines, prob heaps more but in a rush as I goda pack the shed for our big move in 2 days, shes going in for cert tomorrow Im just so happy
have also refitted all the flares and they sit real good now, and its had a good polish, cant wait to get it out and about
#72
Posted 13 April 2009 - 07:28 AM
#73 _rookie_
Posted 21 June 2009 - 05:51 PM
ANY REASONABLE OFFER CONSIDERED. THIS IS IN SHOW CONDITION AND READY TO ROLL.
PM ME FOR MORE INFO. WILL BE SOLD CHEAP.
#74 _SSTorrie123_
Posted 19 June 2010 - 09:29 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users