lc indicator switch
Started by
torana?
, Jul 16 2008 03:04 PM
10 replies to this topic
#1
torana?
-
- Members
-
- 94 posts
Forum Member
- Location:QLD
- Joined: 23-May 06
Posted 16 July 2008 - 03:04 PM
do you have any plans to make these things? without the wiring part
#2
_les_
_les_
-
- Guests
Posted 16 July 2008 - 08:12 PM
We have no plans to make these at the moment but I will add them to the list
Les
Les
#3
limo
-
- Members
-
- 2,672 posts
Lotsa Posts!
- Location:Adelaide
- Car:most Torana models, Jag, Vauxhall, Triton, Staesman
- Joined: 24-May 06
Posted 16 July 2008 - 08:16 PM
are these the same part for HK/HT/HG? would increase demand
Edited by limo, 16 July 2008 - 08:19 PM.
#4
_les_
_les_
-
- Guests
Posted 17 July 2008 - 08:57 AM
according to the part number they areare these the same part for HK/HT/HG? would increase demand
#5
Dangerous
-
- Members
-
- 948 posts
Forum Fixture
- Location:Adelaide, SA
- Joined: 14-November 05
Posted 09 September 2008 - 03:28 PM
Les, if you do make them, it would be good if you could make the the support around the two centre screw holes stronger and/or deeper so that longer screws can be used. They have a dome head screw screwed into them to hold the central bearing in (the heads of the screws hols the top of the bearing in place), and one also holds a brass strip to earth the centre for a good horn earth. Once they crack - which they all do eventually - the bearing is free to move around, and the horn loses most of its earth.
#6
_les_
_les_
-
- Guests
Posted 09 September 2008 - 03:44 PM
Thanks DangerousLes, if you do make them, it would be good if you could make the the support around the two centre screw holes stronger and/or deeper so that longer screws can be used. They have a dome head screw screwed into them to hold the central bearing in (the heads of the screws hols the top of the bearing in place), and one also holds a brass strip to earth the centre for a good horn earth. Once they crack - which they all do eventually - the bearing is free to move around, and the horn loses most of its earth.
I will keep that in mind, I missed a NOS one on ebay the other day i was going to use as a sample
#7
nanbar
-
- Members
-
- 103 posts
Forum Member
- Name:Nando Barbanera
- Location:Australia
- Car:LC 2 door V8
- Joined: 06-February 19
Posted 02 November 2024 - 07:59 PM
Are the LC and LJ indicator knobs the same thread?
#8
Indy Orange
-
- Members
-
- 2,881 posts
Lotsa Posts!
- Name:Paul
- Location:Australia
- Joined: 03-July 09
Posted 02 November 2024 - 08:16 PM
Different.
#9
nanbar
-
- Members
-
- 103 posts
Forum Member
- Name:Nando Barbanera
- Location:Australia
- Car:LC 2 door V8
- Joined: 06-February 19
Posted 02 November 2024 - 08:23 PM
Different.
thanks
#10
Indy Orange
-
- Members
-
- 2,881 posts
Lotsa Posts!
- Name:Paul
- Location:Australia
- Joined: 03-July 09
#11
nanbar
-
- Members
-
- 103 posts
Forum Member
- Name:Nando Barbanera
- Location:Australia
- Car:LC 2 door V8
- Joined: 06-February 19
Posted 03 November 2024 - 04:07 PM
Thanks Indy, that's the one I saw. I have an LC with and LJ steering column and I broke the indicator knob (LJ type). I was wanting to know whether that one on eBay would fit on my LJ indicator stalk hence the thread type question.
Edited by nanbar, 03 November 2024 - 04:07 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
