NEW MR5000 Build Thread
#1
Posted 08 April 2009 - 11:24 AM
heres lastest news and progress tghe 253 is pretty badly in need of a rebuild so probably just going to leave it till i get the money for the 355 but trying to buy a house so that will be a lil while off
alway had a lil bit of rust in the plenum chamber just under neath the scuttle panel bodged it up but its come ack to bite me
its rusted out the floor a bit so this time gonna fix it all properly heres some photos
#2
Posted 08 April 2009 - 11:37 AM
#3
Posted 08 April 2009 - 11:41 AM
#4
Posted 08 April 2009 - 11:47 AM
#5
Posted 12 April 2009 - 05:57 PM
nearly got all the floor out cheapo cordless drill shat itself after about 12 spot welds i drilled out so went to bunnings looking for a replacement makita hammer drill/impact drill 75 bucks you beauty works great spits out the spot welds in no time
started on the bonnet rust today as well was only a couple of tiny bubbles visible but as pretty much every one knows rust is very decieving turns out the panel beater bodged the rust job when he painted it wich is not suprising sfound so many short cuts he did possibly the worst panel beating by a so called profesional ive seen to date
any way ill load some pics up when they finish loading onto you tube i think im gonna have to replace the bonnet its beyond my capabiltiys might ask dads panel beater whether he reckons its salvageable
also got stuck into emmas vh today on the only 3 rust spots on her car lower right hand quarter under window seal and spare wheel well
pics soon
#6
Posted 12 April 2009 - 06:34 PM
#7
Posted 12 April 2009 - 06:52 PM
#8
Posted 12 April 2009 - 07:14 PM
#9
Posted 12 April 2009 - 07:18 PM
#10
Posted 13 April 2009 - 07:16 PM
#11
Posted 21 April 2009 - 10:10 PM
#12
Posted 01 May 2009 - 05:38 PM
#13
Posted 01 May 2009 - 06:02 PM
#14 _manderin_red_slr_
Posted 03 May 2009 - 08:52 AM
were is your glovebox key hole?
#15
Posted 03 May 2009 - 10:31 AM
#16
Posted 03 May 2009 - 10:54 AM
#17
Posted 04 May 2009 - 07:05 PM
heres whats happening with the stato
#18
Posted 05 May 2009 - 08:41 AM
#19
Posted 05 May 2009 - 08:48 AM
emmas vh needs about another 1200 to get it spooftastic
#20
Posted 05 May 2009 - 12:54 PM
Ruts
#21
Posted 05 May 2009 - 05:46 PM
any way heres some new pics taken about 20 mins ago
#22
Posted 20 May 2009 - 04:58 PM
#23
Posted 26 May 2009 - 08:27 PM
next on the list for the stato is to get 9 inch in i got the assembly drum to drum sitting at a mates place just needs mounts welded on so i need a spare banjo housing its suprisingly cheap to get changed over its gonna be 250 to get brackets all changed over at shaun mullen race cars
#24 _scalpa1_
Posted 26 May 2009 - 09:40 PM
cheers tony
#25 _@milco@_
Posted 26 May 2009 - 11:47 PM
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users