NEW MR5000 Build Thread
#26
Posted 27 May 2009 - 08:00 AM
#27
Posted 28 July 2009 - 06:28 PM
seems to be good hopefully the weather comes good soon so i can start using it
#28
Posted 29 July 2009 - 09:08 AM
Edited by Heath, 29 July 2009 - 09:09 AM.
#29
Posted 29 July 2009 - 09:14 AM
#30 _73LJWhiteSL_
Posted 29 July 2009 - 10:22 AM
Steve
#31
Posted 29 July 2009 - 04:51 PM
#32
Posted 16 September 2009 - 06:50 PM
will try get some pics if i can find my camera charger
#33
Posted 16 September 2009 - 10:15 PM
btw what ratio is your banjo mate?
Edited by Heath, 16 September 2009 - 10:18 PM.
#34 _doogs_
Posted 16 September 2009 - 10:54 PM
What else do you think you will do on this over the next few months?
#35
Posted 17 September 2009 - 08:30 AM
hopefully ill have the floor welded in and next is to fix the hole under the dash were the water leaks in
then i maght have a go at chopping the other guard then if i end up starting my own buisness and get some cash through next step is either give the fluffy a freshen up or start on the 355
#36 _doogs_
Posted 17 September 2009 - 10:52 AM
hopefully ill have the floor welded in and next is to fix the hole under the dash were the water leaks in
then i maght have a go at chopping the other guard then if i end up starting my own buisness and get some cash through next step is either give the fluffy a freshen up or start on the 355
Cool.
What are the engine specs at the moment ?
#37
Posted 17 September 2009 - 09:58 PM
today por 15d yesterdays work and set up like a tent shed sorta thign for some were to work on the torry because of the rain couldnt have the welder out so now the back yard looks like one of the news that one of those rapists in america have cops will probably come bust my door down soon when they see it
#38 _doogs_
Posted 17 September 2009 - 10:09 PM
at the moment just a 253 match ported heads crow cam forget the specs electronic dizzy extractors quadie
today por 15d yesterdays work and set up like a tent shed sorta thign for some were to work on the torry because of the rain couldnt have the welder out so now the back yard looks like one of the news that one of those rapists in america have cops will probably come bust my door down soon when they see it
Fair enough.
Hopefully this shit weather does piss off for the weekend like forecast, I would like to be able to do some panelwork as well...
#39
Posted 17 September 2009 - 11:50 PM
set up like a tent shed sorta thign for some were to work on the torry because of the rain
Sounds more like a party marquee.
I'm not busy Saturday night.
P.M me the details, bring a plate etc.......?
#40
Posted 18 September 2009 - 11:18 AM
#41
Posted 18 September 2009 - 03:43 PM
#42
Posted 18 September 2009 - 10:08 PM
I'll have to wander over for a stickybeak - it might help me get a little motivated to do some work on mine!
#43
Posted 21 September 2009 - 08:28 AM
#44
Posted 21 September 2009 - 05:37 PM
in this pic all the holes in the left of the footwell camera still isnt working hope to update pics soon
#45
Posted 29 December 2009 - 11:19 AM
welded up the hole in the previous pic and por 15 it nearly welded the floor pan in just need some more argon ran out with 3 inches left to weld starting on pulling the plenum out to stop the floor from rusting out again and i got some goodies hiding to make it go a bit harder cant wait to get it back out hopefully i will be done by drag day got a fair bit of motivation from boxingday at heathcote saw some torries run some good times the halls matt black 4door ran a 9.45 against a certain crappy red vl and saw mish run down the strip a couple of times he ran low 11s every time i saw but there was a fair headwind so no doubt he can go faster just makes me wanna get back into it and more often than just drag days
any ways heres some progress pics
#46
Posted 29 December 2009 - 11:36 AM
#47
Posted 29 December 2009 - 11:43 AM
#48 _73LJWhiteSL_
Posted 29 December 2009 - 03:03 PM
I'm itching to get stuck into mine... just waiting on Vic bloody roads.
Steve
#49
Posted 29 December 2009 - 05:09 PM
#50
Posted 30 December 2009 - 11:50 AM
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users