
hawks uc sunbird
#851
Posted 14 June 2015 - 09:06 PM
#852
Posted 17 June 2015 - 10:15 PM
#853
Posted 17 June 2015 - 11:13 PM
#854
Posted 25 June 2015 - 07:40 PM
#855
Posted 25 June 2015 - 09:15 PM
Any chance of cobbling an exhaust together from second-hand bits?
Engine pipes would be the hardest to find but if you've got a MIG or TIG the rest shouldn't be too difficult, any exhaust shops nearby that you can dumpster-dive?
#856
Posted 25 June 2015 - 09:26 PM
#857
Posted 26 June 2015 - 11:51 PM
Yeah I hear ya mate, ts frustrating when you're nearly there but a couple of little things are holding you back.
Keep at it mate, you'll get there.
#858
_LS1 Taxi_
Posted 27 June 2015 - 12:08 AM
My advice is to stop chucking money at it until you figure out the issues.
#859
Posted 30 June 2015 - 06:36 PM
^ that's a bloody good offer there hawk,one thing i have found out in life is that after jumping off the deep end and popping up for a breath expecting to drown on the next downward run is too take the hand of help graciously before going under again...if you know what i mean...
#860
Posted 30 June 2015 - 06:56 PM
^^Good advice EunUCh - I have had one of those months on my car, and was ready to pack it away until 2027. A mate stepped in, gave me a hand on the stuff I am trying to do that's way beyond me and it's full steam ahead again! Keep at it Hawk and the offer from LS1 Taxi is pretty cool - (good onya!).
#861
Posted 30 June 2015 - 07:16 PM
#862
Posted 30 June 2015 - 07:23 PM
#863
Posted 30 June 2015 - 10:32 PM
Two thumbs up for you Daz, glad someone is around to help Steve out, fingers crossed you can get it sorted with him and it hits the road sometime soon.
Steve looking forward to knowing what the problem is/was.
#864
Posted 30 June 2015 - 10:43 PM
#865
Posted 02 July 2015 - 07:18 PM
Also a big thanks to daz who is trailering it to melbourne for me next weekend.
#866
_LS1 Taxi_
Posted 02 July 2015 - 07:47 PM
Once funds allow I'd recommend tossing that points dizzy and sourcing a hei.
We can talk about that stuff next Saturday.
#867
Posted 03 July 2015 - 06:00 PM
Couldnt resist and drove it to the exhaust shop for a quote then on to work haha. Got it booked in monday to have it done if I have enought cash left aside.
Bonet needs a lot of adjusting still too.
Attached Files
#868
_76lxJAS_
Posted 03 July 2015 - 06:07 PM
Won't be long and you will be enjoying her every drive u can.
#869
Posted 06 July 2015 - 10:16 PM
exhaust is done for now. can hear how the car runs a lot better now.
adjusted the timing more and the idle mixture screws.
either the box, thrust bearing or clutch is a bit noisy. as I take off it kind of feels like the clutch is slipping a bit not sure yet though ill adjust it more soon.
#870
Posted 06 July 2015 - 10:22 PM
Well done and congrats mate, it's amazing what a deadline can help you get done!
#871
Posted 10 July 2015 - 10:45 PM
cheers couldn't have done it without everyone heres encouragement and help.
went to a bit of a show and cruise tonight which was good.
starting to make a new list of things it needs:
clutch is slipping so new clutch needed
air cleaner
thrust bearing to be safe
fix the leaks in the box
mount some sort of shifter boot to stop the cold air and noise
wire up the wiper motor and heater fan.
Attached Files
#872
_76lxJAS_
Posted 10 July 2015 - 11:05 PM
congrats mate.
its all paying off. glad to see you getting it out and enjoying it.
#873
Posted 10 July 2015 - 11:39 PM
Top job Steve, car is looking good.
The major hurdle is out of the way now, drive the wheels off it and fix the little things as they come along.
Happy motoring young fella.
#874
_LS1 Taxi_
Posted 10 July 2015 - 11:42 PM
+1
It looks great with the V8 in there.
I'll see you in the morning mate. It may even be earlier than 11am. I am planning on leaving here early as the weather is supposed to turn to pot later in the day.
Text me your number mate and I'll let you know an ETA once I get the trailer hooked up and underway.
#875
Posted 10 July 2015 - 11:51 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users