Josh's Ute
#451 _gen3torrie_
Posted 14 November 2011 - 10:09 PM
then it will back for a day over the weekend to have the final tweaking bits done then in the arvo the tow truck will be carting it away to the electrician
then finally vroom vroom
and lots of this and thank frOcks all around
#452 _nial8r_
Posted 15 November 2011 - 08:08 AM
#453 _gen3torrie_
Posted 16 November 2011 - 09:22 PM
so the tunnel was the demise and show piece of the interior so its been concentrated this is the result
and then another surprise i got was he fitted my tonneau cover... didn't ask him too but he's done a fantastic job so far... he's just gotta fit the seatbelt buckles and the seats and thats about it
i need like a square metal plate sorta like the hurst shifter style to g o around the outside of the shifter boot to hold it down to the floor?? any idea's? or should i get one fabricated out of billet or something?
#454
Posted 16 November 2011 - 09:54 PM
#455
Posted 16 November 2011 - 10:02 PM
Youve got a welder and a grinder,the practice will do you good.
Or cut one out of a piece of plate,
Mark a hole for the boot,holesaw the four corners and join the holes up with a grinder and cutting wheel.
#456 _Quagmire_
Posted 17 November 2011 - 12:35 AM
#457 _gen3torrie_
Posted 17 November 2011 - 06:55 PM
#458 _gen3torrie_
Posted 17 November 2011 - 08:29 PM
#459 _gen3torrie_
Posted 17 November 2011 - 08:53 PM
anyone got any idea's were i can get a new blaze knob??? i have googled it so far and have had no luck i would also like to know is that a factory shifter boot?
nice rear
and gotta love that front the black headlight covers are growing on me
#460
Posted 17 November 2011 - 09:09 PM
#461
Posted 17 November 2011 - 09:21 PM
#462 _Quagmire_
Posted 17 November 2011 - 10:13 PM
or just buff the frock outta it
#463 _Gunmetal LH_
Posted 20 November 2011 - 05:30 PM
*No way of saying it without sounding rude...
#464 _CHOPPER_
Posted 20 November 2011 - 07:53 PM
#465
Posted 20 November 2011 - 08:01 PM
#466 _CHOPPER_
Posted 20 November 2011 - 08:07 PM
#467 _gen3torrie_
Posted 06 December 2011 - 12:05 AM
#468 _gen3torrie_
Posted 14 December 2011 - 10:15 PM
anyway i just have to do the timing cover water pump. fit the fuel lines. liquids filled... fit the bumper then off to the electricians to have the final wire up... headlight loom adapted and dash sensors changed.
anyone know were i can get a decent gear shifter boot from preferably similiar to the one i have now but it needs to be taller so it has some flop to it? around 140mm tall i have made a square plate out of aluminium using a mates fancy laser cutter to secure it down to the floor... \
and the 2 utes together
the utes ignition module completely died as i pulled into the driveway :(
and the new ute
#469 _Woodsy_
Posted 14 December 2011 - 10:25 PM
#470
Posted 14 December 2011 - 10:32 PM
But I agree... not a fan of the quality of the job or the design
#471 _gen3torrie_
Posted 14 December 2011 - 10:38 PM
and datto what job and what design?? the carpet looks awesome... the seats are a bit borderline the whole sides were collapsed and torn the trimmer did with what he had...
Edited by gen3torrie, 14 December 2011 - 10:39 PM.
#472
Posted 14 December 2011 - 10:54 PM
#473 _gen3torrie_
Posted 14 December 2011 - 11:02 PM
#474 _Quagmire_
Posted 15 December 2011 - 07:03 AM
#475
Posted 15 December 2011 - 07:59 AM
I love Vt-VX SS seats and dont really think there is anythign wrong with them in this??
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users