Hi guys.
Does anyone make new Cowl vent drain tubes for LX?
I cant seem to find anyone selling them.
Cheers
Cowl Vent Drain Tubes
Started by
_ayios_
, Dec 30 2010 10:10 PM
15 replies to this topic
#2
_Kush_
_Kush_
-
- Guests
Posted 30 December 2010 - 10:23 PM
I don't think it will be hard to make something up. Any rubber shop will sort you out. I've got to make up a longer pipe on the passenger side because I modified some things.
#3
_nial8r_
_nial8r_
-
- Guests
Posted 31 December 2010 - 07:15 AM
surley someone has some sitting around not doing anything with them ???
#4
_BIGCAV_
_BIGCAV_
-
- Guests
Posted 31 December 2010 - 08:34 AM
if 2 sets pop up i would also be interested in a set for remanufacture
thanks
thanks
#5
_trna76hb_
_trna76hb_
-
- Guests
Posted 01 January 2011 - 07:14 AM
Hi
Rare spares sell HK,HT,HG & HQ to WB. Can they be fitted???
Ian
Rare spares sell HK,HT,HG & HQ to WB. Can they be fitted???
Ian
Edited by trna76hb, 01 January 2011 - 07:14 AM.
#7
_Big T_
_Big T_
-
- Guests
Posted 03 January 2011 - 08:33 PM
Add me to that list. Some genius thought removing the right hand side tube to run the engine bay wiring loom through was a good idea. Makes washing the car an interesting experience !!
#8
Posted 04 January 2011 - 08:08 AM
HQ-WB are a bit longer (no big deal) but also have an angle on the lower/outer end which I think would be difficult to get to stay in the hole and sealHi
Rare spares sell HK,HT,HG & HQ to WB. Can they be fitted???
Ian
#9
its Paul
-
- Members
-
- 1,577 posts
Formerly lx8vd77
- Name:Paul
- Location:Gold Coast
- Car:LXSS, VUSS, VESSv & the mighty HB
- Joined: 07-January 08
Posted 05 January 2011 - 11:48 AM
I know where there 4 LH/LX sedans at a wrecker, so I went to see them today and low and behold I found these.
I had to pay $15 per set for them the phukers wanted $20 per set, I said $10, so he split the difference.
So Ayos, BigCav, A9X0SS & Big T are you still after them?
I had to pay $15 per set for them the phukers wanted $20 per set, I said $10, so he split the difference.
So Ayos, BigCav, A9X0SS & Big T are you still after them?
#10
_BIGCAV_
_BIGCAV_
-
- Guests
Posted 05 January 2011 - 03:28 PM
yeah mate, im still keen
let me know how you want to go about it
cheers
let me know how you want to go about it
cheers
#11
_Big T_
_Big T_
-
- Guests
Posted 05 January 2011 - 04:30 PM
As above Paul, if you can put a set aside for me and let me know what you want to arrange for payment and pick up that would be great 
#13
mika03au
View Garage
-
- Members
-
- 812 posts
Forum Fixture
- Name:Michael
- Location:Brisbane
- Car:LX hatch
- Joined: 06-July 11
View Garage
Posted 17 October 2012 - 06:56 PM
Gee these things are hard to get. No specific Torana reproduction units available either....
Do the old Holden ones fit as suggested by American Autos...see link.
Anyone tried or have any advice on these????
Cheers.
https://www.american...ct&option=CVDT2
Do the old Holden ones fit as suggested by American Autos...see link.
Anyone tried or have any advice on these????
Cheers.
https://www.american...ct&option=CVDT2
#14
_Dr LS7_
_Dr LS7_
-
- Guests
Posted 28 November 2012 - 10:06 PM
i think i got a set that im not using,(dam roll cage bar in the way haha) if i can find them $20 posted anywhere in OZ
#15
_UC Kid_
_UC Kid_
-
- Guests
Posted 19 June 2015 - 09:44 PM
hey guys where is the best place to get the cowl drains? or did yous use hk-wb?
#16
mika03au
View Garage
-
- Members
-
- 812 posts
Forum Fixture
- Name:Michael
- Location:Brisbane
- Car:LX hatch
- Joined: 06-July 11
View Garage
Posted 23 June 2015 - 08:04 PM
I did end up matching some at rare spares from an early holden.
Think it was the HR ones.
Think it was the HR ones.
Edited by mika03au, 23 June 2015 - 08:07 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
