
gongs lc/lj parts and wrecking
#1
_BATHURST-32D_
Posted 04 February 2011 - 11:52 AM
i am now selling everything i have collected over the last 20 or so years i have plenty of every thing lc and lj 4 and 6 cly s and gtr aswell as xu1
cheap prices for members here.
cheers john
bonville nsw 2441
#2
Posted 04 February 2011 - 12:32 PM
Are you selling up all the LC/LJ stuff because you have finally discovered that LX Hatches are the Greatest Torana ever made? LOL

#3
_toranatime_
Posted 05 July 2011 - 02:06 PM
cheers
#4
_grumpy 026_
Posted 05 July 2011 - 02:39 PM
Why????? You love Torana"s.
G.
#5
Posted 05 July 2011 - 05:28 PM
#6
_mob_
Posted 05 July 2011 - 10:06 PM
0433729059 or 0266535453
i am now selling everything i have collected over the last 20 or so years i have plenty of every thing lc and lj 4 and 6 cly s and gtr aswell as xu1
cheap prices for members here.
cheers john
bonville nsw 2441
G'day John,
I'm chasing the parts shown that are circled in red. Do you happen to have them?
Cheers,
Mark

#7
Posted 11 May 2012 - 10:30 AM
Thanks Dave
#8
Posted 19 May 2012 - 12:53 PM
#9
_mikecatts_
Posted 21 May 2012 - 09:21 AM
Im yet to recieve the panels..Im sure they will arrive today or tomm..Im in the rural of adelaide and it takes a bit longer to get to me..
Anyway..I noticed this add....
John..Im after the correct numbered calipers and brake discs for my 8/70 LC gtr xu1....Can you help?
And The L an R seal ends for the seal panels..I have the straight piece..I just need the seal ends.. can you help??
SEE PICS.
Original steering wheel.
Nibless rims
dated single bolt master cylinder...
A decent front grill...Mines a bit dinged and it might be cheaper to buy one than get it fixed.
Front radiator support panel.
Front radiator beaver.
Front LH inner guard piece from battery tray forward..SEE PIC
An original XU-1 battery tray..I can only find the repo one with out the side support.
L & R front guard bottom rust repair panels..from door to guard.
LC XU-1 door trims???????
LC seat skins, front and rear.
I will be after some other bits..Not too sure as yet..I will let you knpow as I get closer..
I bought a rotissiere..Will make it sooo much easyier to work on..
Thanks for the help/advice..
Mike
#10
_oz772_
Posted 22 May 2012 - 06:23 PM
#11
Posted 22 May 2012 - 07:46 PM
Hi John if you have part 1 from photo above i'm very interested as at the momen nothing inplace and bar is held inplace by nothing at all.
Thanks Dave
PM sent
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users