73 replies to this topic

[John/lj]

Picked up my set belts today for the gtr top class
Work thanks guys.

[shanegtr]

I got SBS to rewebb the drivers side seat belt in my cruiser a couple of years ago. The replacement belt was spot on - a shit load cheaper than what toyota would want for a new one. I didnt bother ringing up wreckers or looking for a second hand one, why would you bother when for $120 you can have a brand new belt. Top stuff guys, I recommend you guys when ever I see someone talking about replacing seat belts on the many other various car forums Im a member of

[hainzy]

Gday daniel.
I have a HZ sandman which needs new belts. Being a sandy with buckets i just need the 2.. Can you guys do these? And if so, would I be better to send you my belts/reels/buckles etc for reconditioning or do you just do the whole lot from scratch? Cheers.

[derrin71]

Just got my Hatch belts back from Seat Belt Solutions. Had the front and rear lap-sash ones rewebbed.
Top notch job. Would definately recomend them to anyone.

[ReplicarSLR]

Just had all the ones for LX done, only a few day turn around, top job, highly recommended

[Swarbs]

Big thanks to Alex and the team at SBS

 

Minor glitch and sort of being my fault but taken in their stride and sorted without a problem

Cannot complain about the after service and willing to sort through it

 

Great product and service

[Cook]

Gents,  Disregard above email address for Daniel, as I just found out he hasn't been there for close to 3 years.  Try this address [email protected] .  They gave me a quote virtually on the spot.  Cheers Ron

[Potta]

Yeah have to agree, got one belt done as requested by the man at the licensing centre and we were both very happy with the end result.

 

Will be getting the rest done when funds allow.

[Crackers222]

Hi all

 

I have a near original LC 4dr with bucket seat. Front seat belts are ordinary and need refurbishing. I have spoken to Alex at Seat Belt Solutions and I am arranging to send fronts and buckles for refurb and for inertia reels. My question is will the inertia reel fit to existing anchor point without having to go for the option of a relocation bracket (ie clearance behind the seats for the inertia reel). I would prefer to keep the existing anchor point on the B pillar for simplicity and originality.

 

Alex wasn't sure without seeing the car and the photos I sent didn't clarify, however he wants to ensure that I have no issues when the belts are returned to me. He suggested I talk to anyone who has used his services for inertia reels so he can look up their job card for the best solution.

 

I am wondering if any of you have installed these reels from SBS in a 4 dr LC or LJ without requiring the relocation kit. My seats are all the way back. I am a bit long legged and need the room. I put a set in my LJ GTR 30 odd years ago The only issue was packing behind the reel to level it up but the seats were different being tilt type for the coupe and may have better clearance. Cant remember. ( I'm so old I fart dust   )     

 

Cheers in advance

 

 

Attached Files

•  20171101_131019_resized.jpg   90.3K   7 downloads
•  20171101_131056_resized.jpg   157.69K   6 downloads

[Crackers222]

To clarify, the inertia reel sets I installed n my GTR 30 years back were not from Seat Belt Solutions. I can't even remember where I got them. They were generic from memory and not Torana specific.

[Lc69]

I believe Bomber has pictures here showing them installed.
I am doing the same myself, but have only purchased and installed the rears belts at this stage.

[Rainman]

I remember going through a well known parts supplier here in Adelaide. Handed over my belts and to them they will be going into a restored Torrie. Anyway on collection I was horrified and asked the question. There are three stages and this is stage one . So why didn't you let me know this when I dropped them off ??. No answer. I phoned the number on the new tags and spoke to the owner. WOW what a nice bloke . I explained the situation in regards to experience with his resellers. He insisted returning these belts at no cost and sent them back to me in exceptional condition. He is from WA and remember him saying it hard to find good quality and he sends his bike parts to Adelaide for chroming . This guy if still in business (as this was maybe 8 years ago) will supply exceptional belts. Can supply phone number if anyone is interested. ps to this supplier in Adelaide . I have known of your poor efforts in customer satisfaction and your excellent efforts in taking there money. Don't tell me that there is no need to polish the bottom parts of the re-swaged bumper bars.

[Crackers222]

I believe Bomber has pictures here showing them installed.
I am doing the same myself, but have only purchased and installed the rears belts at this stage.

 

Thank Tony,

 

I can see Bomber's post but cannot view attachments

[Lc69]

I think I have pictures somewhere, I try and find them

[Lc69]

Looks to fit easy.
Can take a picture of my rear retractable belts tomorrow if that helps.

 IMG_0387.JPG   265.87K   7 downloads

[Lc69]

Here's a better pic I found

 IMG_0392.PNG   2.87MB   10 downloads

[Crackers222]

Here's a better pic I found

IMG_0392.PNG

 

Thanks Tony,

 

Bomber advised that his seat aren't original. My original buckets go a bit further back so I don't think there will be enough clearance. I am sure I will send originals to SBS and get them to refurbish original sash. She won't be a daily driver and it will be good to have the original buckles 

Cheers