Jump to content


Banjo Diff Flange

Started by _Kal05_ , Mar 03 2012 11:26 AM
Torana 253 Banjo Diff Yoke

  • Please log in to reply
12 replies to this topic

#1 _Kal05_

_Kal05_
  • Guests

Posted 03 March 2012 - 11:26 AM

Hi guys

i am currently in the process of converting my 173 LH Torana (trimatic) to a 253 with a Borg Warner T5. I know this may have been covered before, but i was told i could replace my 6 cyl Banjo diff yoke with a banjo yoke from a v8? so i bought a yoke off ebay which i was told came from a 308 diff, however when i went to fit the v8 yoke to the 6 cyl diff i found that the flange was too big to fit into the diff. i was wondering if someone could point me in the right direction as i dont really want to change the whole diff to a v8 one. here are some pictures of the yoke i was sold.

Attached File  IMG_0618.JPG   177.42K   9 downloads

Attached File  IMG_0619.JPG   188.99K   9 downloads

#2 hanra

hanra

    Oh My, Don't you post alot

  • Members
  • PipPipPipPipPipPipPip
  • 10,918 posts
  • Name:Brad
  • Location:Farrrrrr North Qld
  • Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
  • Joined: 24-March 11

Posted 03 March 2012 - 12:16 PM

When I get home this arv Ill check my old one.

#3 _Kal05_

_Kal05_
  • Guests

Posted 03 March 2012 - 03:50 PM

thanks Hanra that would be appreciated

#4 hanra

hanra

    Oh My, Don't you post alot

  • Members
  • PipPipPipPipPipPipPip
  • 10,918 posts
  • Name:Brad
  • Location:Farrrrrr North Qld
  • Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
  • Joined: 24-March 11

Posted 03 March 2012 - 04:34 PM

U coulda bought mine, saved on freight!!!


Posted Image

Posted Image

#5 _Kal05_

_Kal05_
  • Guests

Posted 03 March 2012 - 06:05 PM

i still might mate, whats the measurement of yours across the back? like in my 2nd picture

#6 hanra

hanra

    Oh My, Don't you post alot

  • Members
  • PipPipPipPipPipPipPip
  • 10,918 posts
  • Name:Brad
  • Location:Farrrrrr North Qld
  • Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
  • Joined: 24-March 11

Posted 03 March 2012 - 10:53 PM

Posted Image

#7 _Kal05_

_Kal05_
  • Guests

Posted 04 March 2012 - 07:45 AM

How much do u want for it mate? I'm sure that's the one I need

#8 _Kal05_

_Kal05_
  • Guests

Posted 06 March 2012 - 06:23 PM

Big thanks to Hanra for helping me get the problem sorted! Much appreciated mate

#9 hanra

hanra

    Oh My, Don't you post alot

  • Members
  • PipPipPipPipPipPipPip
  • 10,918 posts
  • Name:Brad
  • Location:Farrrrrr North Qld
  • Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
  • Joined: 24-March 11

Posted 06 March 2012 - 07:22 PM

No problems mate. Bout time I was able to lend a hand round here!!

#10 _Big Rob_

_Big Rob_
  • Guests

Posted 07 March 2012 - 12:21 AM

That's a V8 yolk you bought, I'm surprised it didn't fit on your 6 cyl diff pinion splines. I've swapped many yolks around from diff to diff without trouble. I guess I've just never run into your particular problem. Glad Hanra could help. (and you could have used your 6 cyl tailshaft, uni-joint and diff without any problems anyway).

#11 _The Baron_

_The Baron_
  • Guests

Posted 07 March 2012 - 12:14 PM

Maybe it was from a salisbury "V8" diff?

#12 _Kal05_

_Kal05_
  • Guests

Posted 07 March 2012 - 06:56 PM

Yes I believe the yoke was from a Salisbury but the person who sold it to me refused to admit that! And I couldn't use the 6 cyl shaft as the t5 was from a ford so it had a much larger slip yoke which I couldn t find one to fit the original shaft and as i would have to get it cut down anyway i decided to usethe 3 inch tail shaft that came with the gearbox and just put the v8 diff yoke on with a cross over uni. But regardless the shaft is now fitted and I can move on to saving for the exhaust system then we are on the road!

#13 hanra

hanra

    Oh My, Don't you post alot

  • Members
  • PipPipPipPipPipPipPip
  • 10,918 posts
  • Name:Brad
  • Location:Farrrrrr North Qld
  • Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
  • Joined: 24-March 11

Posted 10 September 2012 - 09:00 PM

Kinda wish I didnt sell you this mate... Just went to fit my tailshaft and the friggen diff shop have fitted the incorrect yoke, 6cy I guess.... I now need a V8 Banjo Diff yoke. F*ck me.
Back to General LH-LX-UC



Also tagged with one or more of these keywords: Torana, 253, Banjo, Diff, Yoke

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

  1. GMH-Torana
  2. → Holden Tech
  3. → General LH-LX-UC
  4. Privacy Policy
  5. The Rules! ·