Steering Coupling
#1
Posted 04 November 2013 - 08:08 PM
I really would prefer to keep a rag type joint for my car but nobody seems to sell them.
Any ideas where I could source one?
Nolathane is out due to extractor to joint clearance. Don't think the double uni set up is suitable for a road car.
Any ideas or comments would be helpful.
Interested to hear from guys who run the double uni joints.
#3
Posted 04 November 2013 - 10:22 PM
Rare Spares sell them.
http://www.rarespare...duct=9946440KIT
I have seen them and called them today to see if they sold the disc by itself.
The rare spares one is a complete assembly, really the only part I need is the disc as the one I have is rebuildable.
Just thinking $140+ is a lot of coin when I need a $5 disc of rubbery raggy stuff.
Though I do commend rare spares for doing something for us, just some more options would be nice.
At this stage looks like the industry has again gone the "that is all there is...do you want it or not" route.
Any guys running the double uni joint set up able to shed some light on how their set up is and if it is suitable for road use?
Edited by mika03au, 04 November 2013 - 10:23 PM.
#4
Posted 04 November 2013 - 10:30 PM
I have the rubber disc by itself for $20 + post
#5
Posted 04 November 2013 - 10:53 PM
i need one neilI have the rubber disc by itself for $20 + post
#6
Posted 04 November 2013 - 11:39 PM
$40 for you
No worries mate remind me next time theres a cruise on unless you need it earlier
#7
Posted 04 November 2013 - 11:51 PM
it would be cheap at half the price$40 for you
No worries mate remind me next time theres a cruise on unless you need it earlier
will do neil!
#8
Posted 05 November 2013 - 03:11 AM
One sooner rather than later
#9
Posted 05 November 2013 - 07:34 AM
#10
Posted 05 November 2013 - 08:39 AM
I only have 4 left
One for Michael
One for Dave
One for Welby
One for Kev
Might need to get Dennis and Craig to bring some more back !!
#11
Posted 05 November 2013 - 09:52 AM
#12
Posted 05 November 2013 - 08:05 PM
I only have 4 left
One for Michael
One for Dave
One for Welby
One for Kev
Might need to get Dennis and Craig to bring some more back !!
Thanks Neil. Appreciate your help.Datto .....Welby and myself both want two each ....so now you have no stock left .....
#13
Posted 05 November 2013 - 08:25 PM
Datto .....Welby and myself both want two each ....so now you have no stock left .....
That would be fine if you had have spoken up before Dave and Mike
But since they spoke first they get first
So you and Welby can have one each at this stage
#14
Posted 05 November 2013 - 08:32 PM
thanks mate.
you still down in st james ?
#15
Posted 05 November 2013 - 08:38 PM
Still working at the same place if you want me to take one to work mate
#16
Posted 05 November 2013 - 09:03 PM
yes please
would you have a standard exhaust for a 76 4.2 SS, from the manifold joint back ?
#17
Posted 05 November 2013 - 09:15 PM
Now your asking
I'll look tomorrow thru the books
Alot of that stuff is gone sadly
#18
Posted 05 November 2013 - 09:24 PM
ta mate
#19
Posted 05 November 2013 - 10:51 PM
ok thanks Datto just pm how you want us to pay you ...thanks
#20
Posted 23 December 2013 - 09:04 PM
My hatch needs one as well
Cheers
#21
Posted 23 December 2013 - 09:37 PM
For you
1 left of my own personal ones
I'm in no rush to use it myself and car replace it with my next Rock Autos order in January
So if your keen we can do a deal
#22
Posted 24 December 2013 - 07:22 AM
Datto......if you are going to order more next month I will be keen for one more ....thanks
I am sure there would be a few members keen as well ....
#23
Posted 24 December 2013 - 08:12 AM
I'll be getting a few extras Kev... so shall make sure I get another for you
#24
Posted 24 December 2013 - 01:47 PM
#25
Posted 24 December 2013 - 06:05 PM
and me please
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users