Voting Image Splitting here or click on the RAT
above
Posted 22 July 2014 - 02:42 AM
Posted 22 July 2014 - 02:49 AM
Thank-you very much Victor,
I like the plan before we do bit too, and this is the real coy.
Will be an interesting voyage, and learning curve for the allowing bits, but will try our best to keep within the structure case.
Hi Dave
If the way you're gone about this build thread is anything to go by, then I can't wait to see what you do with your car.
Victor
has been too cold and wet for painting the Bonnet and Boot, but meanwhile, an A9X scoop may pop in.
Edited by GASPOWER, 22 July 2014 - 03:02 AM.
Posted 25 July 2014 - 01:31 AM
Posted 25 July 2014 - 01:38 AM
Yes, does represent a few body changes Victor, thank's.
Trans-am look
Also, I have started to design the GTR, Tacho and Speedo Gauge Decals here:-
http://www.gmh-toran...trument-decals/
Edited by GASPOWER, 25 July 2014 - 01:48 AM.
Posted 27 July 2014 - 12:18 AM
Posted 27 July 2014 - 12:23 AM
Fantastic Victor,
I have always liked the double grille look with quarter bumpers, thank's for showing Mate.
Those flares are huge, along with the deep dish and bonnet pins.
I have never seen that picture before hey.
Posted 27 July 2014 - 12:58 AM
That was the Chevy Vega look "back in the day" Dave
Posted 27 July 2014 - 01:03 AM
That fellow Driving looks Cool as hey Rob.
thank's for the Info
Posted 28 July 2014 - 06:35 PM
Posted 29 July 2014 - 01:06 AM
Posted 29 July 2014 - 06:01 AM
Wow Tony,
That is a very Cool Gangster Torana, amazing work how the front door locks onto the rear door hey.
so now I have to see if a 2 door door fits using a 4 door rear door, hmm, one gets tape out.
Something different for ya Dave.
Thank-you Mark for your kind words,
I just have to get the updates rolling, as I am starting on the simple little bits first Mate.
I wish you well on the journey and look forward to seeing your updates.
Posted 14 August 2014 - 07:42 PM
Just received the Rear LC/J wheel Arches from Mikecatts,
Now I got to put them in:-
IMG_5636.JPG 56.42K 5 downloads
Before
IMG_5824.JPG 54.15K 2 downloads
New arches to go in
Thank-you Mike for helping out Mate.
Posted 14 August 2014 - 07:55 PM
My pleasure Dave... Do they do what you want them to?
Posted 14 August 2014 - 08:00 PM
The Arches are in great condition Mike,
will do what is necessary to make them fit.
Posted 14 August 2014 - 08:54 PM
Im gald your happy.. Theres ment to be a meteor shower tonight.. Im might have a looksee
Posted 14 August 2014 - 08:59 PM
an Alien Space Craft even
always got to keep an eye out
Posted 14 August 2014 - 08:59 PM
Posted 14 August 2014 - 09:02 PM
Hey Cool
thinking blasting
Posted 14 August 2014 - 09:08 PM
.
Dave...
The way ide go about it is
Unpick the replacement guard bits.. sandbalst/por 15... Do the inner first usually has the least rust,, sandblast por 15, then spot/plug weld the outer back on..I wouldnt be doing as one bit.. Too hard and wont get right.. Been there done that BOTH ways..
Posted 14 August 2014 - 09:12 PM
will look into your method Mike,
sounds like the Plan, thank-you.
Posted 20 October 2014 - 01:02 AM
Cool project Dave. I especially like the side pipe idea.. wouldn't have thought of it but from the mock-up picture you've done it really suits the look of the LC.
Had a go at the wheel arches yet?
Posted 20 October 2014 - 01:56 AM
Hello Jack,
Thank-you for the kind jester Jack Mate.
Troy helped with putting all the pieces of the Cool RAT picture together for me,
and I am yet to weld in the rear arches.
As soon as something happens, an update will be imminent.
Oh, and does this mean, I am off the Hook now, and can continue as normal.
Had a go at the wheel arches yet?
Posted 11 November 2014 - 10:48 PM
Posted 11 November 2014 - 10:56 PM
I say, the New Years has it Craig.
Any progress Dave?
Getting the feeling lately,
and near ready to take pictures of the front end K Frame coming out using the two stands method.
Holden Tech →
Paint & Panel →
LC Fender sealStarted by dacastle , 16 Nov 2024 LC, Fender seal |
|
|
||
Holden Tech →
Interior →
Doorcards LC InteriorStarted by dacastle , 19 Jul 2024 doorcards, interior, LC |
|
|
||
Holden Tech →
Interior →
Roof LiningStarted by dacastle , 01 Jul 2024 Roof lining, gtr, LC and 1 more... |
|
|
||
Holden Tech →
Interior →
window winders LC GTRStarted by dacastle , 08 Jun 2024 window winders, interior, LC |
|
|
||
General →
General Discussion →
LC lower dash labelsStarted by VerdoroLC , 04 Apr 2024 LC, dash, labels, stickers |
|
|
0 members, 2 guests, 0 anonymous users