202ing a Beemer
#226
Posted 04 June 2017 - 10:22 PM
#227
Posted 04 June 2017 - 11:56 PM
Quick little thing.
Transbrake will knock few tenths off it both ends.
Sometimes wonder if hydraulic handbrake be worth a try for some cars.
#228
Posted 05 June 2017 - 06:52 AM
Nothing like the sound of an 11sec Holden 6.
What fuel are you using?
#229
Posted 05 June 2017 - 08:25 AM
Warren I'm still running 98, and no nitrous....yet.
It's only just started getting exciting.
#230
Posted 05 June 2017 - 11:07 AM
#231
Posted 05 June 2017 - 12:49 PM
Your convertor is probably setup for a spray, so probably no to tight.
#232
Posted 05 June 2017 - 01:02 PM
This is fantastic!
What needles are you running now? She is flying...
Im running UM, I found UP were a little lean up above 6000, which meant I needed to run it too fat down low off idle to compensate. UM needles, give or take, have corrected this in my setup.
#233 _Bomber Watson_
Posted 05 June 2017 - 01:42 PM
#234
Posted 05 June 2017 - 05:30 PM
Cheers fellas, it's a good feeling getting a nice tune up, kinda like you've achieved something i guess.
You're spot on Warren, the converter is made for the gas. If you watch the tacho off the line, the converter doesn't flare much if at all once i mash it, but it worked fine in the EH. So from that it's totally down to the car. The EH ran a boosted brake system and was around 400kg heavier than the beemer so it really made the stall work. The same combo in a lighter car (860kg) & not running a brake booster wont stall up, so this is what the transbrake will overcome.
I'm running UA needles at the moment, perfect for the top end. UF's were nearly there but the UA's gave me a perfect 12.7 ratio across the line, although way too rich for the first 1/4 track seeing 9.6 - 10ish on the gauge & the engine coughing & farting. I have UP & UJ needles but obviously they were too lean.
Time to hit the mintylamb site again & sus out some more profiles....
#235
Posted 05 June 2017 - 07:38 PM
Yeah doesn't look like it's leaving as hard as it should so got to be worth few tenths with harder that launch which should help it get just over 7k before finish line instead of 6.5 by looks of it.
Be good to see how quick it will go n/a then gas.
Personally I'd just want a wheel in the air
#236
Posted 05 June 2017 - 07:47 PM
#237
Posted 05 June 2017 - 08:33 PM
Personally I'd just want a wheel in the air
THIS!!!!!
#238
Posted 05 June 2017 - 08:40 PM
And here's what the tacho's doing...
https://youtu.be/IjfSS6Xsb5Y
Is that a wideband guage (just left of the monster guage)? F*ck man that nearly gave me an epileptic fit trying to watch it, its going crazy...
Love the 7200rpm burnout by the way!
#239
Posted 05 June 2017 - 09:23 PM
Ha, yep that's the one, I couldn't read a bloody thing either! Bugger me why i can't record it properly, the wife reckons it's something to do with it being an LED display.... That was recorded on my phone, i don't think my little JVC had the same problem. Apologies for destroying your brain
#240
Posted 05 June 2017 - 11:51 PM
Is that a wideband guage (just left of the monster guage)? F*ck man that nearly gave me an epileptic fit trying to watch it, its going crazy...
Love the 7200rpm burnout by the way!
Doesn't everyone do their burnout at 7200rpm.
7200 off the trans brake should get some air under the tyres.
#241
Posted 06 June 2017 - 01:36 AM
Love it Jonesy!!!
Trans brake and front wheels up will be fun.
#242
Posted 06 June 2017 - 12:11 PM
Doesn't everyone do their burnout at 7200rpm.
I dunno - im too busy trying not to hit something to watch my tach hahahahaha, cant say Im good at burnouts lol
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users