Hey guys, i have alot of different answers so i was hoping you guys could clear it up... THE QUESTION: How man kw's is a Blue 308 5L engine. ( NOT RED)
49 replies to this topic
#2
EunUCh
-
- Members
-
- 2,769 posts
Lotsa Posts!
- Location:not this planet
- Car:japos
- Joined: 23-November 06
Posted 22 January 2015 - 04:33 PM
not much more than a healthy 202 
#3
_UC Kid_
_UC Kid_
-
- Guests
Posted 22 January 2015 - 04:42 PM
hahahahha, well i researched then and looks to be around 120, my uc hatchback kerb weight is like 1157, so canculations =
120 / 1157 = 0.1037165082, than multiply by 1000 to get tones, = 103.7165. so im well under the 130kw per tone limit! NO 202
#4
EunUCh
-
- Members
-
- 2,769 posts
Lotsa Posts!
- Location:not this planet
- Car:japos
- Joined: 23-November 06
Posted 22 January 2015 - 04:53 PM
253 red was claimed 180(5)HP(135kw),308 red claimed was about 240 BHP(180kw), blue and efi were probably not too much higher?
180kw or 240 BHP for 308 rings a bell,although the efi may have been 185?
#5
_UC Kid_
_UC Kid_
-
- Guests
Posted 22 January 2015 - 04:58 PM
yeah i know that blue and black 308 are less kw than red, red is alot higher im prety sure?
#7
EunUCh
-
- Members
-
- 2,769 posts
Lotsa Posts!
- Location:not this planet
- Car:japos
- Joined: 23-November 06
Posted 22 January 2015 - 05:17 PM
cant' see why they would have went backwards to less HP out of 308 in blue/black to less than that of a 253, but who knows?
180/1157=155
even if the 5L was only 150,just scrape in with those numbers.
#8
_uca78t_
_uca78t_
-
- Guests
Posted 22 January 2015 - 07:11 PM
That'll will need to be weighed for engineering in NSW just like my UC sedan with a 253 & she weighed in at 1340 kg's with the V8, air con, tow bar, 17 x 8's & LPG system
#11
EunUCh
-
- Members
-
- 2,769 posts
Lotsa Posts!
- Location:not this planet
- Car:japos
- Joined: 23-November 06
Posted 22 January 2015 - 07:43 PM
I don't think anyone is trying to put you off the idea of V8 option considering the UC did not come from factory with a V8.
But with the "rules" that have been made regarding "P" platers make some sort of sense considering that "power and acceleration" do play a part with
"lead foot because it there to be used" in written people and cars
Mind the public,i see "P" platers in 4 cylinder stuff doing stupid shit that could just as well get us killed,not good considering it sounds like you have
put a lot of effort into what you intend drive around.
Not so much the "power"..more of how you use it.
So they did go backwards in power,no wonder they went broke
#12
_Bomber Watson_
_Bomber Watson_
-
- Guests
Posted 22 January 2015 - 08:05 PM
Emissions control gear mostly mate.
#13
rexy
-
- Members
-
- 3,650 posts
Lotsa Posts!
- Name:Rexy
- Location:Melbourne
- Car:Kia grand carnival!!!
- Joined: 03-November 09
Posted 22 January 2015 - 08:12 PM
Depends which road test report you read. 179 kW according to one VC commodore road test report yet another review of a VC Brock stated 160kw. Seems unlikely that the std was higher than the brockodore...
#14
_uca78t_
_uca78t_
-
- Guests
Posted 22 January 2015 - 09:12 PM
1157 kg's kerb weight will be with a 6 cyl & I stated before my UC was 1340 kg's with a V8 & I still had a std diff.
You mention before that your UC has a 9 inch. So that is a much heavier diff the same go's for the V8 compaired to a 6 cyl so all these mods are adding more weight to the car. So there is a lot stuff the engineer will be lookig at. Like the motor, the drop tank, the diff & he required a brake upgrade. So I think you should ponder it for a while because it'll cost a bit of coin.
You mention before that your UC has a 9 inch. So that is a much heavier diff the same go's for the V8 compaired to a 6 cyl so all these mods are adding more weight to the car. So there is a lot stuff the engineer will be lookig at. Like the motor, the drop tank, the diff & he required a brake upgrade. So I think you should ponder it for a while because it'll cost a bit of coin.
#15
_UC Kid_
_UC Kid_
-
- Guests
Posted 22 January 2015 - 09:22 PM
yeah alright, thanks for the comments guys, and dont worry i wont be driving stupid, i put way to much effort and time into this car
#16
_Bomber Watson_
_Bomber Watson_
-
- Guests
Posted 22 January 2015 - 09:37 PM
1157 kg's kerb weight will be with a 6 cyl & I stated before my UC was 1340 kg's with a V8 & I still had a std diff.
You mention before that your UC has a 9 inch. So that is a much heavier diff the same go's for the V8 compaired to a 6 cyl so all these mods are adding more weight to the car. So there is a lot stuff the engineer will be lookig at. Like the motor, the drop tank, the diff & he required a brake upgrade. So I think you should ponder it for a while because it'll cost a bit of coin.
Im not fluent with NSW rules but im pretty certain the weights they gather for P plate legalities and the like will be factory specified weights, the same thing they use in other states to base modification guideliens on.
Just the same as the engine output they use will be whatever they have on there records, regardless of what the engine actually makes.
Cheers.
#17
_imj411_
_imj411_
-
- Guests
Posted 22 January 2015 - 10:11 PM
Yep Muzzy is right, 126KW or 1 KW more than a VN V6. I have owned both and they both went well when healthy in Commodores so would go better in a UC. Cheers. Aaron.
Edited by imj411, 22 January 2015 - 10:12 PM.
#18
_uca78t_
_uca78t_
-
- Guests
Posted 22 January 2015 - 10:20 PM
Regardless of what system they used. Under NSW laws the car will need to weighed for the change of records & with that extra weight & horsepower it's almost certain to require HQ at a min. It's still not clear that he can drive it under our P plate laws. One of the requirements is that a P plater can't drive a car that has an engine mod that requires engineering. IMO if you put a V8 in a UC std or not well that's a mod!
#19
_UC Kid_
_UC Kid_
-
- Guests
Posted 23 January 2015 - 08:32 AM
but there was a rta person that told me a engine mod, is just a modification done directly to the motor, to enhance the engines preformance, which the 308 has had nothing done. Will be finding out this aftertoon and getting a definet answer fingers crossed!
#20
EunUCh
-
- Members
-
- 2,769 posts
Lotsa Posts!
- Location:not this planet
- Car:japos
- Joined: 23-November 06
Posted 23 January 2015 - 09:12 AM
You might be in for some hoop jumping, there is also a power restriction on P1 and P2 and under 25yrs of age at the time.
The power to weight is one aspect that you might get a away with.
The others that might not be so easy are "an engine with 8 or more cylinders" and "an engine with a power output of more than 210kw".
Even though you may be "ok" power output wise and power to weight, it might be a different story with the number of cylinders involved, unless there is some loophole that exempt's you from the 8 cylinder rule taking into account the power output.
Edited by EunUCh, 23 January 2015 - 09:12 AM.
#22
_UC Kid_
_UC Kid_
-
- Guests
Posted 23 January 2015 - 10:52 AM
yeah what bomber said^, i have now talk to a person high up in the rta and said it is 50/50 so shes going to call back later, and i also now have a guys email who can give me a definet answer, BUT i just need to give him my engine number now buty cant find it!, i found this engraved inbetween the pistons and under the air filter: 1278 4563. it also had FIRING ORDER and GM there. is this it?????
#23
_Bomber Watson_
_Bomber Watson_
-
- Guests
Posted 23 January 2015 - 10:55 AM
No thats the manifold part number.
The engine number is on the blocks deck face beside the front of the head.
The engine number is on the blocks deck face beside the front of the head.
#24
_UC Kid_
_UC Kid_
-
- Guests
Posted 23 January 2015 - 11:02 AM
oh ohk thanks, so i read a thing online and said i need to get under the car with a spotlight? sorry i dont even know what the blocks deck face is haha, im still 17 and learning :/
#25
_uca78t_
_uca78t_
-
- Guests
Posted 23 January 2015 - 11:09 AM
No that's not it. It's on the block on the passenger side (I think) under the head towards the front of the motor.
Also tagged with one or more of these keywords: v8, engine, 308, kw, PMR, torana, uc, question, help
Holden Tech →
General Questions and Help →
What colour red is this car "Whos up"Started by LE38OY , 24 May 2022  Colour, Whos up, Whosup, Paint and 2 more...
|
|
|
||
Holden Tech →
Engine →
Some Advice Re 202 Blue .Started by mandytory , 14 Apr 2022 Engine, Projects, 12 port head and 3 more...
|
|
|
||
Holden Tech →
Engine →
202 very rough idle at lights while in DStarted by avoidev , 19 Jan 2022 engine, stall
|
|
|
||
Holden Tech →
Engine →
2600N engineStarted by stealthxu1 , 28 Jul 2021 lc, gtr, nasco, engine, motor
|
|
|
||
General →
Torana Trivia and Memorabilia →
Bathurst A9X Torana's: A Photographic HistoryStarted by LX2DR , 23 Nov 2020 Torana, A9X
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
