4 replies to this topic

[mika03au]

Trying to find a supplier for the original plunger type door switch wiring lugs. So far no success.

Have repaired and rebuilt all my wiring but these lugs have been a test.

Anyone been able to source them?

 

 IMG_0506.JPG   30.88K   1 downloads

 

 CLSK2.jpg   7.34K   1 downloads

 

[BIG KEV]

Maybe just cut them out of a old harness and wire them into your new harness .....

[Indy Orange]

Yeah just crimp them on to new

[S pack]

Michael, how many of those light switch ring connectors do you need? I've got a couple here on an old HQ harness and a couple on an old HT/G harness.

[mika03au]

Thanks guys.
Splicing in an old one is a last option.
Most of the repairs I have done is run a new correct colour code wire with new lugs each end into the original connectors to remove all those dodgy splice points.
I do have a spare harness here to get them, would prefer new.
Actually have been able to source heaps of hard to get colour code wires from this loom, it has been a saviour for these repairs.