21 replies to this topic

[Dodgey]

If you are looking for a pair of heavy-duty finned drums to suit your LC/LJ here is an option. 

These were machined by Keith Croft. Many of you, especially those with track cars, would already know Keith. Over the years, Keith has done a lot of fabrication work for Group Nc Toranas and has been involved in motorsport since the 1960's.

If you want to know more, or have some fabrication requirements for your Torana, give Keith a call on 02 4573 6418.

 

Steve

 IMG_2322.jpg   231.54K   6 downloads

 IMG_2324.jpg   241.59K   2 downloads

 P1370935.jpg   137.32K   2 downloads

 P1370938.jpg   121.22K   1 downloads

 P1370939.jpg   126.68K   1 downloads

[yel327]

How much are they? I wouldn't mind a pair of those to suit HQ front drum. If you use a 9" with Ford rear brake plates to suit 2.25" shoes (as in XA ute/van) you can run HQ front drums on them if running HQ stud pattern on the axles. If running Holden stud pattern you can use HK-HG front drums.

[xu2308]

Cool how much for LJ rear Drums

[madtoranajzedded]

Awesome.would love to get a set later..

[RallyRed]

Uh oh...I feel a serious 2017 Challenge Bathurst coming on!.
Keith certainly does nice work.

[Dodgey]

You will need to give Keith a call to discuss price & lead time/availability (02 4573 6418).

 

Steve

[Dodgey]

Uh oh...I feel a serious 2017 Challenge Bathurst coming on!.
Keith certainly does nice work.

Maybe Col. But first i have to get the car to go before needing to make it stop!!

 

Steve

[RallyRed]

Maybe Col. But first i have to get the car to go before needing to make it stop!!

 

Steve

ha ha mate....youve got about 325 days.

p.s If you go out to get the OS  pulleys.....can you grab mine too?....I'll eFT you the coin if you are happy with it .

No hurry.....dont think they will be ready till mid Jan.?

Regards

Col

[jd lj]

How about if someone in the know makes a list of the parts that Keith is making or modifying?

[Dodgey]

I have contacted Keith Croft. Below is a list of the more common components he can supply for your Torana.

If you have other requirements or need additional information, give him a call on 02 4573 6418.

 Keith Croft Price List.JPG   95.29K   9 downloads

 

[purrlx]

Nice list of bits for the serious guys

[madtoranajzedded]

Lower control arm.can purchase these for hq
off the shelf.

I gather they would look similar to these
But with a metal jacket..
 unnamed (5).jpg   28.18K   5 downloads

[jd lj]

Thanks for sharing the component list Steve.

[xu2308]

The Rear Drum Fins would be $380 a pair ? Ummm not Each ??? Must be a Boo Boo

[RallyRed]

I'd be thinking each?....imagine the size of the billet they came out of ?....steel not cheap in that size, + his work is 100%.

[madtoranajzedded]

agree ^

[piquet]

Lower control arm.can purchase these for hq
off the shelf.

I gather they would look similar to these
But with a metal jacket..
unnamed (5).jpg

 

Wher are these obtained from, Please?

[madtoranajzedded]

Superpro should have them dude or just give
Keith a buzz as should b same for hq..

Edited by madtoranajzedded, 23 December 2016 - 05:10 PM.