178 replies to this topic

[bat 53]

Thanks gong for the tip all done


Sent from my iPad using Tapatalk

[lctriples]

Hey albert, did gong give you any tips on re-installing the pins when re-assembling, which is what I need to do? (Do you just simply try and create a lip over the ends of pins with whatever metal is left after removing) Thanks paul (Not trying to hijack your thread but maybe useful for when you need to do the same)

Edited by lctriples, 11 December 2019 - 03:55 PM.

[bat 53]

g'day paul 

yes have to make new pins 

but the ones with the handle going to try to machine 1-2 mm 

off the collars then get them cromed 

might try roll pins for the other one 

 

cheers  bat

[lctriples]

Cheers Bat, appreciate it!

[bat 53]

g'day all 

are all the rods for the accelarator zinc plated !!!!!

geting things ready for march for when the platers back

 

cheers  bat

[bat 53]

bump please  reply

[grumpy xu1]

Yes mate, they sure all are, across the firewall and over to the carburetor. Gary.

[bat 53]

thanks Gary

[bat 53]

G,day all pulled the mirror apart for repairs and chroming. Found this inside!
18/7/71 as far as I know it is the original mirror

Cheer. Bat



Sent from my iPad using Tapatalk

[71xu1]

As far as I know LC has the round mirror and only one hole in the door . I can take a pic of mine if you like. Maybe a change over thing?

[S pack]

Was the HQ rect mirror mounted to the std LC mirror stem?

[bat 53]

yes it certainly was

i have one on a rectangle and one on a round

[bat 53]

g'day all getting parts zinc plated 

i noticed that a couple of the accelarator rods arms are gold zinc 

so is it all gold or silver or mixture 

cheers  bat

[Indy Orange]

As far as I know LC has the round mirror and only one hole in the door . I can take a pic of mine if you like. Maybe a change over thing?

Thought they had two, one for the screw and another for the locator on the stem.

[bat 53]

sorry my mistake ! mine only had the round mirror 

but when stripping for crome in my parts i found a mirror with the same stork 

but a rectangle one . had a brain faideeeee    

thanks for the pick up 

what about the accelarator rods gold or silver or mixed

 

cheers  bat

[claysummers]

I think this is the LC mirror bat. Also on EH, don't know about HR. There is as small hole aft of the bolt hole in the door.

Sent from my SM-G973F using Tapatalk

[sibhs]

Gold on LJ GTR not sure on LC.

[bat 53]

so mine beeing a cf lc gtr 

could be a change over thing   

[bat 53]

thanks gong

[grumpy xu1]

The little box that screws to and bolts to the firewall is blue-silver.
Cheers gong

Yes, all apart from the pivoting arm that goes in it, which is gold zinc. Gary.

[bat 53]

G’day all
Just taken these out of the malaise’s
Are they painted or bare

Cheers bat


Sent from my iPad using Tapatalk

[grumpy xu1]

I have new original nut sets for the exhaust studs to mate.