They were raw cast iron from memory.
I painted mine with POR15 cast iron paint. Looks amazingly real and has lasted 5 years without fail. Love that stuff.
Marty
Posted 13 March 2020 - 09:17 PM
They were raw cast iron from memory.
I painted mine with POR15 cast iron paint. Looks amazingly real and has lasted 5 years without fail. Love that stuff.
Marty
Posted 13 March 2020 - 09:38 PM
thanks marty
i'll go and see colin his around the corner
got the whole range of por
Posted 15 March 2020 - 07:56 PM
Posted 15 March 2020 - 09:22 PM
Posted 15 March 2020 - 09:26 PM
Thats not the date code, its on a machined face.
Posted 15 March 2020 - 09:53 PM
Posted 16 March 2020 - 08:27 AM
Thats not the date code, its on a machined face.
My error sorry. Serial number is on machined face.
Just trying to help but showing my lack of something!
Marty
Posted 16 March 2020 - 10:59 AM
so when was the changeover to the ribbed case !!!!
my understanding that all lc with the all aussie were smooth case
Edited by bat 53, 16 March 2020 - 11:01 AM.
Posted 19 March 2020 - 07:54 PM
Posted 20 March 2020 - 04:58 PM
Just saw your post re ribbed case, I sold an LC CK Xu-1 gearbox a while ago, it was a ribbed case dated July 71
Posted 21 March 2020 - 12:59 PM
Posted 12 April 2020 - 03:15 PM
Posted 12 April 2020 - 03:36 PM
Posted 12 April 2020 - 07:07 PM
tanks clay
thanks
Posted 13 April 2020 - 12:08 AM
KBS Rust Blast then they are ready for etch. If you CRC them it will stop rust but then you have to clean it off to etch.
Posted 13 April 2020 - 11:11 AM
thanks marty but i don't do paint
did it once , the painter threaten'd to bash me if i did it again
cheers bat
Posted 13 April 2020 - 06:15 PM
Posted 13 April 2020 - 08:15 PM
Yeah thanks Clay and Bat.
I reckon the painter will prefer rust blast on them rather than oil.
Marty
Posted 14 April 2020 - 11:08 AM
thanks guys
don't know what rust blast is
about the wheels been prepped
these were painted black straight on bare steel no under coat
cheers bat
Posted 14 April 2020 - 03:33 PM
Hi Bat,
Rust Blast is a metal treatment solution made by KBS. There are many other brands and names out there that stop the rust flash that occurs and leaves it ready for painting.
Marty
Posted 14 April 2020 - 08:44 PM
thanks marty i'll cheek with colin
Posted 21 April 2020 - 11:18 AM
Posted 22 April 2020 - 12:34 AM
Posted 07 May 2020 - 05:08 PM
Posted 07 May 2020 - 06:19 PM
Well went to Colin’s not cheap
Went Kerrie’s all zinc plating done I hope
Should have chroming back later this week
Sent from my iPad using Tapatalk
0 members, 1 guests, 0 anonymous users