19 replies to this topic

[Indy Orange]

Hi all ,would someone be kind enough to post a pic on how the tail light harness enters the boot and the route it takes along with the side blinkers .Thanks Paul.

[hanra]

What model body?

[Indy Orange]

LC Brad,I think it comes in through here ? After that I'm not sure.

Attached Files

•  image.jpeg   94.5K   0 downloads

Edited by Indy Orange, 19 August 2018 - 11:42 PM.

[Indy Orange]

.

Edited by Indy Orange, 19 August 2018 - 11:46 PM.

[RallyRed]

Hi Paul.

 

Only pics I have at hand mate,  is this what you wanted?

 

Attached Files

•  20150406_121843_1024x576.jpg   128.77K   6 downloads
•  20150406_121911_1024x576.jpg   91.23K   8 downloads

[jd lj]

Aren't the wires wrapped together on LC's like my LJ is?

[lx308]

You're correct Paul.

[RallyRed]

Interesting factory pic Tony.  There seems to be nothing proided to hold the wires up , on top of the taillight on the passenger side? ..i.e. no clip shown?.

Attached Files

•  lc lj rear wiring harness layout.jpg   142.92K   7 downloads

[lx308]

Yea I noticed that also, there isn't any clips there. I've run my harness runs under the lights as that's how the harness wanted to lay. If that makes sense.

 

 20180818_151303.jpg   166.65K   5 downloads

 

[Indy Orange]

Much appreciated for the reference pics Col,Tony,so it seems the wiring just loops under the buckets and in to the tail lights .

[RallyRed]

Wonder if they were different Adelaide to Brisbane?.
Just for reference, here is my LJ as well. ...they all seem to be wired under the the all lights

Attached Files

•  rps20180820_154940.jpg   152.07K   7 downloads
•  rps20180820_154918.jpg   123.73K   6 downloads

[Indy Orange]

This is what I've done with mine,seems a bit rough and ready ,is this how they were done in the factory?

Attached Files

•  image.jpeg   136.06K   4 downloads
•  image.jpeg   124.01K   5 downloads

Edited by Indy Orange, 20 August 2018 - 04:26 PM.

[Indy Orange]

Interesting factory pic Tony.  There seems to be nothing proided to hold the wires up , on top of the taillight on the passenger side? ..i.e. no clip shown?.

Going by that workshop manual pic it looks like the wiring runs along the top ,and if that's the case the bulb wires must loop over the buckets and into the sockets?

[lx308]

Going by that workshop manual pic it looks like the wiring runs along the top ,and if that's the case the bulb wires must loop over the buckets and into the sockets?

I agree Paul, but I've learnt that the books pictures aren't always correct.
See the clips in Col's photos on the lower part of the housing?

Edited by lx308, 20 August 2018 - 05:33 PM.

[Indy Orange]

Yeah see that Tony ,I've got those clips somewhere ,I'll run the wires as you both pictured.

[RallyRed]

This is what I've done with mine,seems a bit rough and ready ,is this how they were done in the factory?

Reckon you are on the money mate

[Indy Orange]

Thanks for your help fellas.

[71xu1]

How I did mine.

Attached Files

•  image.jpeg   253.47K   5 downloads

[71xu1]

Drivers side

Attached Files

•  image.jpeg   162.85K   5 downloads

[Indy Orange]

Cheers Dave ,thanks for taking the time.The more info the better.