7 replies to this topic

[rodomo]

Can anyone help with these measurements please?

I can make the hole and am trying to work out the best position on a sheet to sell.

Cheers

 

 

 

 

Attached Files

•  Measurements.png   1.4MB   13 downloads

[rodomo]

Hmmmmm……… Does this mean I'm gonna hafta spend 1/2 a day wiggling frankenstein http://www.gmh-toran...9-frankenstein/ out of the carport and measure it myself?

[tuxedoss]

Measured from underneath a=26mm b=65mm  c=48mm. A and C are fairly accurate B was a bit harder to measure so give or take a few mm.

I saw someone on facebook or ebay selling a repair patch for that bit just in last few days 

Edited by tuxedoss, 06 December 2018 - 08:24 PM.

[CYCO355]

Might be best to get yours out to measure.

I got A:25 B:58 and for C I got 14 before there’s a curve I would say is for the fan/motor.
If you’re going to sell them I would make them roughly to measurement and put this sticker rare spares use


Sent from my iPhone using Tapatalk

[rodomo]

Thank you gentlemen...…………….I'm in the "ballpark" now.

[rodomo]

I saw someone on facebook or ebay selling a repair patch for that bit just in last few days

That would be me.

If you’re going to sell them I would make them roughly to measurement and put this sticker rare spares use
Sent from my iPhone using Tapatalk

I'm just pressing the correct size big hole into a flat sheet as a starting point for others.

Attached Files

•  P1010001.JPG   211.4K   6 downloads

Edited by rodomo, 07 December 2018 - 01:23 PM.

[CYCO355]

Looks good, what are you selling them for?

[dattoman]

I might need one Dammit !!