Hoodlining padding
#1
Posted 17 January 2019 - 06:39 PM
#2
Posted 17 January 2019 - 08:52 PM
#3
Posted 17 January 2019 - 10:12 PM
Anyone noticed where the padding sits in this area when doing Hoodlining?
Don't remember ever seeing any padding there in my LJ when I had the headling out in '96, so I went and had a feel along that rail and there is no padding.
#4 _SableMet7/73_
Posted 17 January 2019 - 10:44 PM
I'm with Dave, none there on my LJ either.
Only padding was on the C pillar.
#5 _mikecatts_
Posted 18 January 2019 - 06:51 AM
yes it did on LJ and LC.... as per my pics will be ok..
Attached Files
#6
Posted 18 January 2019 - 07:19 AM
Perhaps another Adelaide v Brisbane thing or the padding was dropped in production in '73?
Edit: Actually, it would make sense if the padding became redundant when the energy absorbing sun visors were introduced into production.
Edited by S pack, 18 January 2019 - 07:23 AM.
#7
Posted 18 January 2019 - 05:39 PM
#8
Posted 19 January 2019 - 01:54 PM
Attached Files
#9
Posted 19 January 2019 - 02:00 PM
Attached Files
#10
Posted 20 January 2019 - 05:45 AM
I seem to remember removing a rear parcel shelf cover board and having padding underneath that scored piece which kicks up at the bottom of the rear windscreen,maybe to stop vibration.
That's correct. Perhaps though it's more to lift the back so that it sits just tucked under the rear windscreen rubber with no gap.
#11
Posted 20 January 2019 - 07:42 AM
Hi James, out of interest, does your LJ have those pads on the roof rail above the visors?
Cheers
Dave.
#12
Posted 20 January 2019 - 12:19 PM
#13
Posted 21 January 2019 - 05:43 PM
#14
Posted 21 January 2019 - 07:38 PM
The 9/73 LJ Adelaide 4 door untouched one owner original car I wrecked a few years ago had no padding, nor did my 12/73 Brisbane GTR, but the GTR has been through a few rebuilds.
#15
Posted 21 January 2019 - 07:57 PM
#16
Posted 21 January 2019 - 08:03 PM
I have found out an original unrestored LC CK XU1 with no front roof rail pads either.
#17
Posted 21 January 2019 - 08:06 PM
#18
Posted 07 November 2023 - 07:45 PM
Just checked my original roof lining for my 10/70 brisbane built car. You can see the whiter area at the front of the roof lining where the foam was touching confirming in my case it did have the foam as per LC manual
Attached Files
#19
Posted 07 November 2023 - 08:09 PM
I doubt it was a foam type material. Would have been more like that straw coloured matted hemp type padding material that GMH commonly used back in the day.
Edited by S pack, 07 November 2023 - 08:10 PM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users