Im hoping one of you Gurus can help me,
Ive got an FX holden with a Torana rack fitted to a HR front end. Im driving it from Brisbane to Rockhampton soon to use for my neices wedding. As the car hasnt been used much in the last few years i thought i would give it all a once over, scrubbed inside edges on front tyres, so needs a wheel alignment. but while im doing the wiggle of the wheels etc checking wheel bearings steering etc, I find a heap of play on the passenger side. stick head underneath and find the end of the rack is flopping around like the proverbial cock in a sock, pull the boot off and find the rack floating loose in the end of the housing, like its got no bush or bearing to hold it centred. Now for the life of me i cant remember if i used an LJ or LH rack, how do i tell? and is this an easy fix? can i just buy the bits and strip it down and rebuild it myself? I should mention that the rack has been shortened to suit the car as well.
Any Advise would be appreciated, Its booked in for a wheel alignment thursday Next week, so ideally getting it sorted before them would be cool
If theres any Gurus here in Brissy that can do it for me Im happy to pay either folding or liquid....
Cheers
Edited by fx48_eh64, 03 April 2019 - 05:33 PM.