311 replies to this topic

[CI 0308]

Well come on Brother, we are all waiting, its been over a month now !!!

[Ricky Bobby]

Hey fella, I have been busy working on the finish list and it's a lot shorter now. The door weather strips took two weekends of being gentle, then Daimon came around and 2 hours later they were on. I've learnt to be patient with interior guys (or face a murder charge) The bottom line is I'm going to debut the car on March 14th (Toranarama, Tas Auto Museum) The glass is all in and the interior will be finished next week!!! It won't be registered so she's a trailer queen. I'll post some pics when it's a bit more together.

[Ricky Bobby]

If any one has a sliver grill in very good condition, could you please leave a message. Thanks

[Ricky Bobby]

These are the before pics of the final wrap up, plenty of work to do

Attached Files

•  IMG_1488.jpg   220.18K   10 downloads
•  IMG_1490.jpg   150.24K   11 downloads
•  IMG_1492.jpg   200.23K   11 downloads
•  IMG_1493.jpg   160.53K   12 downloads

[Heath]

Aaaawesome!

[Ricky Bobby]

We have traction with the fit out, Steve came around on Saturday and trimmed the boot, fitted the door cards and squeezed the console in without any pain, the seat belts came today so I fitted the rear ones in tonight. Front seats soon and then we are taking...

Attached Files

•  IMG_1519.jpg   202.63K   11 downloads
•  IMG_1520.jpg   193.22K   10 downloads
•  IMG_1521.jpg   184.72K   10 downloads
•  IMG_1530.jpg   202.84K   12 downloads
•  IMG_1532.jpg   234.94K   10 downloads
•  IMG_1533.jpg   212.62K   10 downloads

[jeffblanco]

Hi Harvey,

are the seat belts your old ones reconditioned or are the new?

If they are new, what brand are they and where did you get them?

 

Regards Mando.

[Ricky Bobby]

Hi Harvey,

are the seat belts your old ones reconditioned or are the new?

If they are new, what brand are they and where did you get them?

 

Regards Mando.

Hi Mando, They are new from Rare Spares and are a great replacement for the originals. The big problem is you need to use your original bolts (the ones they supply are smaller and don't fit the threads) So you need to drill the sleeves to make the bolts fit.

[Ricky Bobby]

I have replaced the front and rear springs and this time I chose red. Pedders sport rides 30mm lowered. The bumpers and grill are in. (I really want a silver one but this is cool for now) The number plates are for the show, Copping Performance was a one man Speed shop in a country town we grew up in. The guy was a mentor for Daimon and he passed away to soon. Daimon asked to use his logo on any projects that would fit Greg's approval. So I'm very proud to have this opportunity.

Attached Files

•  IMG_1536.jpg   251.81K   10 downloads
•  IMG_1535.jpg   184.21K   11 downloads
•  IMG_1538.jpg   215.48K   12 downloads
•  IMG_1539.jpg   203.35K   9 downloads

[neglectedtorana]

Car looks great Harvey, well done on the progress.

Where did you get the shift knob? Is it a Hurst?

 

Cheers, Tom

[Ricky Bobby]

Car looks great Harvey, well done on the progress.

Where did you get the shift knob? Is it a Hurst?

 

Cheers, Tom

Hi Tom, yes it is. I think it was from Outlaw Speed Shop 

Edited by Ricky Bobby, 05 March 2021 - 04:08 PM.

[Ricky Bobby]

The Hatch is ready for the show Steve has finished the interior, Pro Automotive have given it a rough tune ( It will be dyno tuned soon) I now have a ride height I'm happy with, It will need to be higher to pass rego but that's cool. The Hatch has had it's first wash in the 9 years I've had it !!! This has been a personal journey to create my own dream car and I'm very proud to put my name to it. Thanks to everyone for your support and advise. Engineering next...

Attached Files

•  IMG_1544.jpg   174.25K   10 downloads
•  IMG_1545.jpg   222.4K   10 downloads
•  IMG_1546.jpg   185.05K   9 downloads
•  IMG_1551.jpg   232.77K   11 downloads
•  IMG_1552.jpg   240.38K   10 downloads
•  IMG_1554.jpg   262.56K   10 downloads
•  IMG_1548.jpg   219.3K   10 downloads

Edited by Ricky Bobby, 12 March 2021 - 08:25 PM.

[neglectedtorana]

That was a quick finish of the remaining fiddly bits, well done Harvey!
Car looks great in the outdoors, congratulations. Sure you will enjoy it, a lot! And hope engineering goes easy.

Cheers, Tom

[CI 0308]

BEAUTIFUL Brother. Shit it's been a journey but that is a "beautiful thang". Look forward to sitting in it when I get home later this year. Well done. Look forward to the pictures from the display.

Sent from my SM-A705YN using Tapatalk

[LXCHEV]

Wow - that engine bay!!

[snuff1966]

Magic 

[Ice]

Great job Harvey got ya self a nice looking hatch there 

[Ricky Bobby]

That was a quick finish of the remaining fiddly bits, well done Harvey!
Car looks great in the outdoors, congratulations. Sure you will enjoy it, a lot! And hope engineering goes easy.

Cheers, Tom

Hi Tom, everything is not as it seems, The tune guy told me I only have 10 volts at the ECU so I have a volt drop problem, The accelerator cable is only giving me half throttle (I need to find a replacement) the idle air control is not responding to the ECU the horn doesn't work and a few other items. So basically it was good enough to drive on to a trailer. I have a bit of work to go in finishing project, The show dead line was helpful in completing the inside and giving me a finish list. 

[Ricky Bobby]

Daimon was my pit crew and we made a 6 hour return trip to the show in Launceston, I loved the experience and meet some local Torana nuts. A great day and plenty of cool cars

,,,

Attached Files

•  160756838_340028824114945_8388206485234276433_n.jpg   87.96K   12 downloads
•  160921232_2927613094128051_2024569971144941428_n.jpg   198.18K   14 downloads
•  160294640_1700891483422103_1074785194924366630_n.jpg   359.44K   13 downloads
•  160503120_258721485914187_5980753343059600645_n.jpg   239.05K   13 downloads
•  DSC_0192.jpg   247.91K   12 downloads
•  DSC_0195.jpg   162.89K   11 downloads
•  DSC_0196.jpg   240.76K   11 downloads
•  DSC_0206.jpg   177.97K   13 downloads
•  DSC_0197.jpg   262.84K   14 downloads
•  DSC_0198.jpg   206.81K   12 downloads
•  DSC_0200.jpg   258.21K   13 downloads
•  DSC_0202.jpg   251.22K   12 downloads
•  DSC_0203.jpg   270.46K   12 downloads
•  DSC_0208.jpg   246.07K   15 downloads

[Shiney005]

That Panama (or Mint julep?) car looks the goods too.

[myss427]

Had to put a relay on my main power wire as was always having 12 volt issues to the computer, now I have carbies and no injection, have none of those issues any more, much simpler life, just a huge fuel bill!

[neglectedtorana]

I ran an extra fused power supply to under passenger side dash and connected new stuff like ECU from there, I kept the factory fuse box for the standard Torana stuff

Looks even better outside in the sunshine and in good Torana company, those pictures are music to my eyes

[jeffblanco]

Hi Harvey,

do you have any more pictures?

Those cars look amazing. 

Everyone of those colours are fantastic, Iv'e forgotten just how good those old colours are.

 

Regards Mando.

[SLR576]

Hi Harvey 

 

You would have to happy with the final result as i must say you have done a nice job on the restoration.

its time to enjoy. Cheers

[Ricky Bobby]

Thanks for your comments, It's so good to get the car to this point. The question is what did it cost? I purchased a written off VU SS ute. A UC Hatchback and a LH sedan donor car. Stripped them down and kept what I needed and sold off the rest. Then as I needed parts I made mad love to ebay and Rare Spares. The exhaust and sump plate and gear box cross member mods $5000.00, Interior $7000.00, Steering and engine bay easy 10K. The paint job was a token of the cost and my hours I can't imagine. I'm in there for about 65K (the wife thinks 30K). Numbers aren't the point, this is my car and I'm keeping it.