89 replies to this topic

[CI 0308]

Just another picture of how I want the van to look when finished in regards to wheels and ride height.

 

 

Attached Files

•  Fenner Van 2.png   569.56K   8 downloads

[Shiney005]

Why limit yourself to 8's on the front? You managed to squeeze 10's under the hatch!!! 

 827e1d3d-9bbd-4585-b5be-e3c15d6473a0-xlg.jpg   85.79K   11 downloads

[CI 0308]

Why limit yourself to 8's on the front? You managed to squeeze 10's under the hatch!!! 

827e1d3d-9bbd-4585-b5be-e3c15d6473a0-xlg.jpg

 

Dont worry I tried but the backspace on the 9's and 10's wont allow it and will foul the tie rod end. I have pictures of that Tassie HQ and boy that is the look.   

 

Same as this Tassie ute, I think fat and low is a Tassie thing but I like it   

 

 facebook_1526879307400.jpg   73.42K   6 downloads

Edited by CI 0308, 02 October 2020 - 11:33 AM.

[yel327]

Must be a Tassie thing, they both look horrid! That Orchid HQ would be so nice if put back to a better ride height and fitted with 15x6 and 15x7 RallyeII rims.

[CI 0308]

Must be a Tassie thing, they both look horrid! That Orchid HQ would be so nice if put back to a better ride height and fitted with 15x6 and 15x7 RallyeII rims.

 

Nah common as, thats the reason we all changed them back in the day they look like Gran Dads car !! crap.   

[Bigfella237]

Correct wheels at least...

 

[CI 0308]

Correct wheels at least...

 

Nice Andrew, but even that is a bit on the extreme for me.     

[CI 0308]

Bit of an update, yesterday I bonded in the window panels with the Fusor 108B panel adhesive and today I removed all the screws, sanded back all the excess epoxy, then applied the Evercoat Fiber Tech filler. 

 

Holy Heck isnt sanding that fiber reinforced filler a chore and a half. Spent about 3 hours today with 60 grit in a long block and still not finished.

 

 

Attached Files

•  20201024_122102.jpg   249.19K   4 downloads
•  20201024_123935.jpg   195.3K   4 downloads
•  20201025_134812.jpg   183.88K   5 downloads
•  20201025_143147.jpg   191.37K   4 downloads
•  20201025_165004.jpg   177.3K   6 downloads

[CI 0308]

Ive had these on order from the States for quite a while, they finally turned up. Now just to get my workshop built so I can get it home and start some real work.

 

15 x 8 -12 offset

15 x 9 -1 offset

http://us-mags.com/indy-u101-w-142.htm

 

 

 

Attached Files

•  20210217_111226.jpg   357.17K   2 downloads
•  20210217_105610.jpg   266.52K   4 downloads

[Ice]

Look great Brett maybe a Lion sticker on the caps 

[Shiney005]

Will those rears be wearing anything wider than 265's? Might have to roll the guards.

[CI 0308]

Will those rears be wearing anything wider than 265's? Might have to roll the guards.

 

Seeing that all the paint is coming off and I will be grafting in the side marker lights as well all the guard lips will be getting a gentle tap Laurie just in case 

Edited by CI 0308, 20 February 2021 - 04:15 PM.

[CI 0308]

Last weekend we finally got the new shed slab down so hopefully not long before the van can come home and I can really get stuck in at last 

 

 

Attached Files

•  20210707_132045.jpg   255.33K   3 downloads

[Shiney005]

Where I work up north in Tom Price there was a spot just out of town that had a few old wrecks that was good for bits and pieces. Went out there the other day and after all these years the bloody Shire has decided to clean it up, NOOOOO!!!

Watching Outback truckers the other night, I see there are some blood sucking pieces of eight driving out to all of the stations from Perth to buy up all the wrecks for scrap. The company was called Bozzauto. Someone needs to firebomb the place.

[CI 0308]

Watching Outback truckers the other night, I see there are some blood sucking pieces of eight driving out to all of the stations from Perth to buy up all the wrecks for scrap. The company was called Bozzauto. Someone needs to firebomb the place.

 

Yes I was Sooo Devastated when I saw they were all gone. There were so many good parts left in all those wrecks. 

[Ice]

Let us know when the first Shed party is on   Brett 

Looks like a decent size 

[CI 0308]

Let us know when the first Shed party is on   Brett 

Looks like a decent size 

 

Will do Gene,

12 x 8 x 3.6 wall

[Ice]

Nice 

[CI 0308]

Well good news the shed is finally finished. Just spent the last few days installing lights and power to it. 

 

Have got the hoist on order as well.

 

 

 

 

Attached Files

•  20210827_112431.jpg   153.8K   3 downloads
•  20210828_185324_3.jpg   126.57K   5 downloads

[purrlx]

Looks good now to fill it up.

[CI 0308]

Looks good now to fill it up.

 

Couldnt help myself

 

 

Attached Files

•  20210830_152200.jpg   143.55K   10 downloads

Edited by CI 0308, 02 September 2021 - 04:33 PM.

[Hatchback13]

Wow that’s a monster shed and some cool cars in it. Shed envy right there. Cheers

[CI 0308]

Van is in at last.

 

 

Attached Files

•  20210913_174423.jpg   261.52K   4 downloads

[Cook]

Well done Brett.  I wish I had a shed half that size. I was wondering when the van woulld make an appearance. Cheers Ron

[Shiney005]

So would the orange Mad Max van have had one of these twin headlight nosecones with a Mercedes headlight stuck in there somehow?

 

 Screenshot 2021-09-15 082102.png   945.71K   5 downloads