Jump to content


Photo

LX Hatch Front Seat Restoration


  • Please log in to reply
2 replies to this topic

#1 Mid-life Crisis

Mid-life Crisis

    Forum Member

  • Members
  • PipPipPip
  • 94 posts
  • Name:David Lovett
  • Location:Canberra
  • Car:LX Hatchback
  • Joined: 25-October 20

Posted 24 July 2021 - 04:02 PM

I am after two pieces of advice.

 

Starting to look at my front seats for the LX Hatch resto and they are in bad shape  - Trimming and also the frame rust and runners don't run very well

 

1.     Are the front bucket seats for the LX Hatch the same as the LX and LH Sedan

 

2.     Does anyone know who might do a full resto and retrim on my existing seats


Edited by Mid-life Crisis, 24 July 2021 - 04:03 PM.


#2 Cook

Cook

    Forum Fixture

  • Members
  • PipPipPipPipPip
  • 1,523 posts
  • Location:Melbourne
  • Car:LX Hatch
  • Joined: 27-February 15

Posted 24 July 2021 - 04:21 PM

Hi David.  As far as I know the hatch bucket seats have a different mechanism to allow for the seat to fold fully forward so rear passengers can get in.  Sedans don't as I understand.  I'm only guessing but would think the actual frames would be the same. My seats were pretty rusted and I got them re-plated, which involved sandblasting first. Come up pretty well and I then just gave them a coat of paint for good measure.  Cheers Ron



#3 Mid-life Crisis

Mid-life Crisis

    Forum Member

  • Members
  • PipPipPip
  • 94 posts
  • Name:David Lovett
  • Location:Canberra
  • Car:LX Hatchback
  • Joined: 25-October 20

Posted 24 July 2021 - 05:41 PM

Hi David.  As far as I know the hatch bucket seats have a different mechanism to allow for the seat to fold fully forward so rear passengers can get in.  Sedans don't as I understand.  I'm only guessing but would think the actual frames would be the same. My seats were pretty rusted and I got them re-plated, which involved sandblasting first. Come up pretty well and I then just gave them a coat of paint for good measure.  Cheers Ron

 

Thanks Ron






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users