3 replies to this topic

[Steve TPF]

Firstly, this is for a bicycle project, not a car, so not a high-stress component.

What I want is some alloy discs (probably 5 total,), 4-5mm thick, around 130mm outside diameter, with accurately machined inside diameter. I simply don't have the tools to do it myself.

If anyone here is interested, please respond. I will of course pay in advance for any work done. I know that skilled time is valuable, so I am happy to pay your going rate.

 

If you are interested, please let me know.

[Cook]

Hi Steve. Have you tried anyone local that does waterjet cutting. I have had a few small things done and found them reasonably priced. Cheers Ron 

[claysummers]

If you are anywhere near the Hunter contact Pete Mallaby, Mallaby sheet metal Mount Thornley. He is an FE FC modifier genius, friendly and helpful. Does a lot with water jet, metal and plastic.

Sent from my SM-G781B using Tapatalk

[Steve TPF]

Thanks for the suggestions. Fortunately, I stumbled across a couple of things on Ebay that should do the job. It will take a bit of fiddling, but that's all part of the fun.