2 replies to this topic

[redtorana#3]

Guys can you please let me know what you are using and where you are putting the sensors?

When I got the car my fan is controlled by a thermometer type tube that was placed in the top radiator hose. Not what I want.

Cheers. (I'll keep searching)

[76lxhatch]

Before going EFI I used a Tridon switch mounted in the manifold (next to the gauge sender). These are relatively neat and offer built-in hysteresis (switches off 5 degrees cooler than on).

https://tridon.com.a...mo-fan-switches

 

TFS111 looks like a good option, that may have been the one I was using. Make sure it's a little above the coolant themostat temp or the fans will never switch off.

[Cook]

Hi Brad. I have a Davies, Craig unit Into a port in the inlet manifold. The control panel is mounted under the glove box for access should I need to adjust the temp settings. Cheers Ron